AstroAI YD-127 Heavy Duty Portable Air Compressor User Manual

AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-featured

AstroAI

AstroAI YD-127 Heavy Duty Portable Air Compressor

AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-product

INTRODUCTION – AstroAI

Thank you for purchasing the AstroAI Heavy-Duty Portable Air Compressor. – The product features an automatic overheating protection system. Once the product reaches an unsafe temperature, it will automatically shut off to protect its circuitry.

It also has 4 anti-slip rubber pads to make the product more stable. Thank you again for choosing AstroAI, if you have any questions or concerns regarding your product, please get in touch with us at support@astroai.com

WARNING

  • Please pay attention to electrical safety when using the product.
  • Please do not use the product for unintended purposes.
  • Keep the air compressor away from heat sources, such as a car’s exhaust pipe. Do not use the air compressor around flammable liquids or gases. Keep the air compressor away from fire, corrosive liquids, and strong magnetic fields.
  • Check the exterior of the air compressor before use to ensure it is intact. Do not use it if any parts are damaged.
  • Do not disassemble or repair the compressor. Professional technicians should perform any repairs.
  • Risk of electric shock, do not use the air compressor if it is damaged or if wires are exposed.
  • Do not overinflate tires. High-pressure air can cause injury.
  • This product is compatible with vehicles, cars, bicycles, motorcycles, SUVs, and more. It is also appropriate for RVs, ATVs, ORVs, and pickup trucks.
  • The product provides fast inflation in bicycle tires, but without proper monitoring, this rapid inflation could cause blown tires. Please promptly stop the inflation when the pressure reaches the manufac­turer-recommended value.
  • The product uses accessories rated at 150 PSI. Abide by the inflation instruction provided by the tire manufacturer, which can be found on the tire sidewall. Please get in touch with the manufacturer if you are confused.
  • Use the product in a dry environment. Do not store the air compressor in high-temperature or humid environments.
  • Disconnect the air compressor from all power sources when not in use.
  • The exposed components may get hot during operation, please wear protective gloves to handle the product.
  • Do not move the air compressor by pulling the air hose or power cord.
  • PSI, Bar, kPa, and kg/cm’ are pressure units, not the pressure levels.
  • If pressure is below 40 PSI, the compressor’s maximum working time is 45 minutes. Allow the product to rest for at least 20 minutes after 45 minutes of continuous use.
  • During continuous use, the air compressor may get hot. Let it cool down before storage.
  • Connect the product to a (DC 12 V) 45 A vehicle battery.
  • Do not use chemical substances to clean the air compressor. Only use mild soap and a cloth dipped in hot water to clean the plastic parts.
  • Do not let the product work alone without any supervision.
  • If accessories are missing or damaged when you receive the package, please contact us.

PACKAGE INCLUDES

  • AstroAI Air Compressor x1
  • Rubber Air Hose x1
  • Airflow Controller x1
  • Air Nozzle Cones x2
  • Needle Valve Adapter x1
  • Storage Bag x1
  • User Manual x1

DIAGRAM

AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-1

  1. Metal Heat Sink
  2. Handle
  3. ¼ • NPT Quick Connector
  4. Reset Button
  5. Power Button
  6. Power CordAstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-2
  7. LCD Screen
  8. LCD Backlight Button
  9. LCD Button
  10. Deflate Valve
  11. Quick Connector
  12. Airflow Valve
  13. ¼ • N P T Quick Connector
  14. Rubber Air Hose
  15. 2xAir Nozzle Cones
  16. Needle Valve Adapter

PREPARATION

  • When operating the air compressor, please ensure it is set up in a safe location.
  • Place the air compressor on a dry, even surface.
  • Unpack the package to check if there is any damage. Untie the power cord at full length.
  • How to connect the¼” NPT quick connector to the air hose:
    1. Pull down the snap ring backward.
    2. CD Connect the¼” NPT quick connector with the snap ring and secure them together.
    3. Release the snap ring to secure the connection.AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-3

INSTRUCTION

Note: Ensure the airflow controller has sufficient power before – using the air compressor.

  1. Securely connect the air hose to the¼” NPT quick connector of the air compressor, and connect the other end of the air hose to the¼” NPT quick connector of the airflow controller.AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-4
  2. Remove the valve stem cap from the tire stem, then connect the airflow controller” ‘s quick connector to the valve stem.AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-5
  3. Press the LCD Button to turn on the screen. Press it again to choose the desired unit. 4 options: PSI, Bar, kPa, kg/cm’.
    (Note: The screen will auto shut off after 1 minute of no operation.)AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-6
  4. Start the engine, open the hood, then connect the red clamp to the positive terminal of the vehicle’s 12 V battery, and connect the black clamp to the negative terminal.AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-7
  5. Pull the airflow valve downwards and switch the Power Button of the air compressor to the “I” side to start the air compressor.AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-8
  6. Push the airflow valve upwards to stop the air inflow into the pressure gauge. Doing this reduces airflow pressure errors and helps accurately measure the interior pressure value. After getting the pressure value, pull the airflow valve downwards to continue inflating (if needed).
    (Note: The air compressor continues inflating even if the airflow is blocked.)AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-9
  7. When the pressure reaches the manufacturer-recommended level, press the Power Button on the “O” side and remove the air hose from the tire stem.
    (Note: Excessive inflation leads to high pressure inside the tires. Press the Deflate Valve to deflate the tire, and release the button to stop deflation.)AstroAI-YD-127-Heavy-Duty-Portable-Air-Compressor-fig-10

TROUBLESHOOTING

The air compressor will not inflate

  • Ensure the air hose’s¼” NPT quick connector is securely connected to the air compressor.
  • Ensure the airflow controller’s ¼” NPT quick connector is securely connected to the air compressor.
  • Ensure the battery clamps are correctly connected to the battery.
  • The air compressor triggers the overheating protection system, please cool it down for 20 minutes.
  • The high current may activate the current protection system; the maximum current of the product is 45 A.

An air compressor is working abnormally

  • The connection between the air nozzle and the tire valve is not secure.
  • Insufficient battery level of the airflow controller, please promptly replace the battery.
  • The Reset Button has not been pressed correctly.

Slow inflation

  • The connection between the air nozzle and the tire valve is not secure.
  • Excessive use will slow the compressor’s inflation rate. Unplug the compressor and let it cool for at least 20 minutes.
  • The airflow controller’s battery level is insufficient, replace the old batteries.

Air leakage

  • The connection between the air nozzle and the tire valve is not secure.
  • Ensure the air compressor”s ¼” NPT quick connector is properly connected to the air hose.
  • Ensure the airflow controller’s ¼” NPT quick connector is properly connected to the air hose.
  • The airflow controller’s Deflate Valve is unlocked.

SPECIFICATIONS

  • Model YD-127
  • Working Voltage DC 12 V
  • Power Rating 540 W
  • Inflation Speed 160 L/Min
  • Maximum Working Pressure 150 PSI
  • Display Units PSI, Bar, kPa, kg/cm2
  • Continuous Operating Time 45 Mins
  • Air Hose Length 26.24 ft (8 m)
  • Power Cord Length 6.56 ft (2 m)
  • Dimensions 13.14 X 8.93 X 5.90 in/ 33.4 x 22.7 x 15 cm

RECYCLING

You may dispose of the product when its service life has ended, please -recycle the recyclable parts according to local guidelines.

WARRANTY PERIOD

2-Year Limited Warranty from AstroAI. Each AstroAI Portable Air Compressor will be free from defects in material and workmanship. This warranty does not cover damage from neglect, misuse, contamination, alteration, accident, or abnormal conditions of operation or handling.

This warranty covers the original purchaser only and is not transferable. AstroAI always wants to provide our customers with excellent products and customer service.

Questions or concerns? We’re happy to help! Please contact us via  support@astroai.com

FAQs About AstroAI YD-127 Heavy Duty Portable Air Compressor

What’s the duration of a portable air compressor?

Typically, filling a tire takes only 60 seconds, but inflating a standard tire from 0 to 40 psi takes 3 to 4 minutes. Note: Before using the air pump again, please switch it off after 10 minutes of continuous use and let it cool for 15 minutes.

What is a portable air compressor’s maximum pressure?

To get the best performance and cut down on energy waste, make sure your portable air compressor is turned on and has a sufficient PSI. The maximum pressure output of a portable air compressor made by Pilot Air is between 140 and 160 PSI.

How much time does it take to fill a compressor?

The compressor can fill the tank with air more quickly the higher the CFM. More compressed air is required to fill a larger tank. It shouldn’t take longer than two to five minutes, on average.

What does CFM stand for in full?

The abbreviation for cubic feet per minute is CFM. The cubic feet of air that are moved in a minute is measured by CFM.

How much air compressor CFM is there?

Cubic feet per minute is referred to as CFM. It is employed to calculate the cubic feet of air that are moved in a minute. You would calculate the amount of air for determining CFM in air compressors.

How is compressor capacity determined?

Pressure and volume factors are typically used to calculate a compressor’s air capacity. The most crucial element in determining air capacity is pressure. The volume reduces and the air molecules become more compact as the pressure rises.

What’s the duration of a portable air conditioner?

We time how long it takes a portable air conditioner to bring the test chamber’s temperature down from 90°F to 85°F in our air conditioner tests. It requires at least twenty minutes, and frequently considerably more. In contrast, the greatest window air conditioners take no more than 15 minutes to cool a room by 10° F.

How is compressor time calculated?

One of the PRO recommendations is to use the following calculation to find the compressor’s release time: 60000 divided by the tempo equals the audio compressor’s release time in milliseconds.

Can an air compressor operate nonstop?

This is because, unlike other types of compressors (scroll, reciprocating), they are continuously cooled by lubrication oil. Rotating screw compressors on continuous duty have a 24-hour operating cycle.

For what duration can an air compressor operate?

The life expectancy of an air compressor is also significantly influenced by the frequency and intensity of use. For instance, the average lifespan of a reciprocating air compressor is 50,000 hours.

For More Manuals by AstroAI, Visit Latest Manuals

AstroAI YD-127 Heavy Duty Portable Air Compressor User Manual 14 AstroAI YD-127 Heavy Duty Portable Air Compressor [pdf] User Manual

Leave a Reply