RAIDER RD-F2 Stage Stainless Steel 50cm Fan User Manual

RAIDER-RD-F2-Stage-Stainless-Steel-50cm-Fan-featured

RAIDER-logo

RAIDER RD-F2 Stage Stainless Steel 50cm Fan

RAIDER-RD-F2-Stage-Stainless-Steel-50cm-Fan-product

Introduction

Dear Users,

Congratulations on purchasing a machine from the fastest-growing power, gas, and air tool brand – RAIDER. When properly installed and operated, RAIDERs are safe and reliable machines, and working with them will give you real pleasure. For your convenience, the excellent service network with 45 service stations throughout the country has been built.

Before using this machine, please read this „Instruction Manual“ carefully. In the interest of your safety and to ensure proper use, read these instructions carefully, including the recommendations and warnings therein. To avoid unnecessary mistakes and accidents, these instructions must remain available for future reference by all who will use the machine.

If you sell it to a new owner, the „Instructions for Use“ must be handed over with it, so that the new user can familiarize himself with the relevant safety measures and operating instructions.

Euromaster Import Export“ Ltd. is an authorized representative of the manufacturer and owner of the RAIDER trademark. The address of the company‘s management is Sofia 1231, 246 Lomsko Shose Blvd., phone 0700 44 155, www.euromasterbg.com;

e-mail: info@euromasterbg.com.
Since 2006, the company has introduced the ISO 9001:2008 quality management system with the scope of the certification: Trade, import, export, and service of professional and hobby electric, pneumatic, and mechanical tools and general hardware. The certificate is issued by Moody International Certification Ltd, England

SAFETY WARNING

Please read this instruction manual carefully before assembling or using the appliance and keep it for future reference.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

  1. To reduce the risk of electric shock, do not immerse or expose this device to rain, moisture, or other liquids.
  2. To avoid electric shock, do not open the case, and service should be performed by qualified personnel only.
    • Heat sources such as radiators, heaters, stoves, or other products that produce heat
    • Direct sunlight
    • Excessive dust
    • Mechanical vibration or impact
    • Lack of ventilation
    • Uneven surfaces make sure the fan is not placed near curtains or other objects that can be sucked into the fan. Never place or operate the device where it may be exposed to:
  3. The fan should not be exposed to drops or splashes, and objects filled with liquids, such as vases, should not be placed on the product.
  4. Ventilation must not be obstructed by covering the ventilation openings. Slots and openings for ventilation are provided to ensure the reliable operation of the product and to protect it from overheating. Do not use with blocked openings, keep away from dust, moss, hair, and anything that can reduce airflow.
  5. Place the fan on a stable, flat, dry surface when operating to avoid overturning.
  6. Connect only to a properly grounded electrical outlet AC 220-240V~50Hz.
  7. Do not operate a fan in the presence of explosive and/or flammable fumes. Do not place the fan near an open flame, cooking, or other heating appliance.
  8. Do not operate the fan with a damaged cord or plug, after a malfunction, or if it has been dropped or damaged in any way.
  9. Do not operate without fan grills in place. Do not use it if the grid becomes damaged or loose.
  10. Do not place the fan near an open window. Rain splashing on the fan can cause an electric shock hazard.
  11. Do not allow the power cord to hang over the edge of a table or counter or touch hot surfaces.
  12. Do not insert fingers or allow foreign objects to enter the grill openings, as this may cause injury or damage to the appliance.
  13. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  14. WARNING: Children must be supervised to ensure that they do not play with the appliance.
  15. Turn off the fan and unplug it when not in use, when moving the fan from one place to another, and before cleaning.
  16. To disconnect, grasp the plug and pull it out of the outlet. Never pull on the cord.
  17. Unplug and unplug when not in use before assembling or disassembling parts; and before cleaning. To avoid tripping hazards, coil the cord securely.
  18. Do not place this appliance on floors that may be marked or damaged by the appliance’s vibration.
  19. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. Do not attempt to repair, disassemble, or modify the unit yourself. There are no user-serviceable parts inside.

Description

RAIDER-RD-F2-Stage-Stainless-Steel-50cm-Fan-fig-1

ASSEMBLY INSTRUCTIONS

  1. Remove the fan from the packaging.
  2. Place the two mounting tubes over the mounting screws at both ends of the fan body.
  3. Place the mounting screws on the stand.
  4. Tighten the outer nuts to the fan mount.

NOTE: When installing the control box, ensure that the cables are routed to the outside of the base.

RAIDER-RD-F2-Stage-Stainless-Steel-50cm-Fan-fig-2

WORKING WITH THE DEVICE

  1. Place the fan on a flat and dry surface.
  2. Plug the fan into a suitable outlet. Select the desired speed setting by turning the speed control knob. There are 4 settings – 0 (off), 1 (low), 2 (medium) and 3 (high).
  3. Adjust the tilt angle of the fan head by slightly pressing the guard.
    Caution: The fan must always be off when making this adjustment.
  4. Turn the speed control knob to “0” and unplug the fan after use.

Warning: Never touch the blade with your hand or other objects when the fan is running.

TECHNICAL DATA

parameter unit value
Model RD-F2
Rated voltage V 230
Nominal frequency Hz 50
Power W 120
Diameter cm 50
 Stages of work  min-1  

3-stages

1050/1150/1300

CARE AND CLEANING

  • Always unplug the fan before cleaning.
  • Avoid contact with moving parts of the fan.
  • Use only a soft damp cloth to clean the fan.
  • DO NOT immerse the fan in water and never allow water to drip into the motor housing.
  • Never spray the device with liquids or immerse it in water or any other liquid.
  • DO NOT use gasoline, paint thinner, or other chemicals to clean the fan.
  • Make sure the fan is disconnected from the mains before removing the grille.
  • Clean the fan blade and grills with a soft damp cloth.
  • CAUTION: The fan blade may have sharp edges. Work with extreme care.
  • Store the fan in its original box or cover it to protect it from dust in a dry place if it will not be used for a long period.

Environmental protection.

To protect the environment, the power tools, accessories, and packaging must undergo appropriate processing for the reuse of the raw materials contained in them. Do not dispose of power tools with household waste! According to the EU Directive 2012/19/EC on waste electrical and electronic equipment and the approval and as a national law, power tools that can no longer be used must be collected separately and undergo appropriate processing to recover their contents scrap.

EXPLODED VIEW

RAIDER-RD-F2-Stage-Stainless-Steel-50cm-Fan-fig-3

SPARE PART LIST

Name Description
1 Front guard Metal
2 Blades Aluminum
3 Triangle nut ABS
4 Rubber mat PVC
5 M8 nut Metal
6 M8 screw Metal
7 Back guard Metal
8 Front housing of the motor PP
9 Motor Metal
10 Capacitor 1uF
11 Pressure line code PP
12 Black housing of the motor PP
13 Switch of gear PA66+motor
14 Rotary knob ABS
15 Power cord PVC+metal
16 Protective ring PVC
17 Feet pipe Metal
18 Footpad PVC
19 Footpad PVC
20 Screw M4x10

DECLARATION OF CONFORMITY FAN RD-F2

Euromaster Import Export Ltd. Address: Sofia 1231, Bulgaria, 246 Lomsko Shausse Blvd.

We declare under our sole responsibility that this product is in conformity and accordance with the following standards and regulations:

  • EN 60335-1:2012+A11:2014+A13 :2017+A1 :2019+A14 :2019+A2 :2019;
  • EN 60335-2-80:2003+A1:2004+A2:2009;
  • EN 62233 :2008; EN IEC 55014-1:2021; EN IEC 55014-2:2021
  • EN IEC 61000-3-2:2019+A1:2021; EN 61000-3-3:2013+A1:2019
  • 2014/30/EU, 2014/35/EU
  • Place&Date of Issue:
  • Sofia, Bulgaria
  • October 20, 2022

RAIDER-RD-F2-Stage-Stainless-Steel-50cm-Fan-fig-4

EU DECLARATION OF CONFORMITY

Euromaster Import Export Ltd.
Address: Sofia 1231, Bulgaria, 246 Lomsko shausse Blvd.

  • Product: Fan
  • Brand: RAIDER
  • Type Designation: RD-F2
    is designed and manufactured in conformity with the following Directives:
  • 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to electromagnetic compatibility. 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits

The product fulfills the essential requirements of the following standards:

  • EN 60335-1:2012+A11:2014+A13 :2017+A1 :2019+A14 :2019+A2 :2019;
  • EN 60335-2-80:2003+A1:2004+A2:2009;
  • EN 62233:2008;
  • EN IEC 55014-1:2021
  • EN IEC 55014-2:2021
  • EN IEC 61000-3-2:2019+A1:2021
  • EN 61000-3-3:2013+A1:2019

RAIDER-RD-F2-Stage-Stainless-Steel-50cm-Fan-fig-5

CONTACT

For More Manuals by Raider, LatestManuals

Leave a Reply