JBL Vibe Beam True Wireless Headphones
About JBL
JBL has long held the view that audio should be presented freely. a space for unrestricted speech where opinions are valued. without limitations. any restrictions.
For this reason, we recognize and expose the fearless self-expression of brave performers, artists, and creators. JBL is here to support you in being who you truly are so you may enjoy the happiness and excitement that comes with being you.
WHAT’S IN THE BOX
APP
JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.
How to wear
FIRST TIME USE
Power On & CONNECT
DUAL CONNECT
CONTROLS
Enable advanced controls by connecting your JBL VIBE BEAM to the JBL Headphones App.
VOICEAWARE
Power off
Manual SETUP
DO MORE WITH THE APP
Charging
Led Behaviors
TECH SPEC
- Model: VIBE BEAM
- Driver size: 8 mm/ 0.315” Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 4.4 g per pc (8.8 g combined)/ 0.0097 lbs per pc (0.0194 lbs combined)
- Charging case: 39.5 g/ 0.0871 lbs
- Earbud battery type: Lithium-ion polymer (48 mAh/ 3.85 V)
Charging case
- battery type: Lithium-ion polymer (530 mAh/ 3.7 V)
- Charging time: <2 hrs from empty
Music playtime with
- BT on: 8 hrs
- Talk time: 4.5 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 100 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -38 DVB/Pa@1 kHz
- Bluetooth version: 5.2
Bluetooth profile
- version: A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter
- frequency range: 2.4 GHz – 2.4835 GHz
- power: <15 dBm
- modulation: GFSK, π/4-DQPSK, 8DPSK
Maximum operation
- temperature: 45 °C
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaging over one gram of tissue. Device types: (IC: 6132A-JBLVBEAM) have also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 1.16W/kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly.
The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. To comply with RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user’s ear and the product (including the antenna).
Head exposure that does not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
This equipment complies with Directive 2014/53/EU radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance.
This transmitter must not be co-located or operating with any other antenna or transmitter. The portable device is designed to meet the radio wave exposure requirements established by the European Union market(France).
These requirements set a SAR limit of 2W/ kg averaged over ten grams of tissue. The highest SAR value 0.221W/kg, was reported under this standard during product certification for use when properly worn on the head.
For More Manuals by JBL, Visit Latest Manuals
- TaoTronics TT-BH053 SoundLiberty 53 Wireless Headphones User Guide
- Beats Powerbeats Pro Wireless Earbuds User Manual
- Beats Flex Wireless Earbuds User Guide
- SoundCore Life Q30 Wireless HeadPhone User Guide
- Acoustics Research AWSBT7 Portable Wireless Speaker Installation Manual
|
JBL Vibe Beam True Wireless Headphones Quick Start Guide [pdf] |
