Emerson CKS1708 SmartSet Dual Alarm Clock Radio
IMPORTANT SAFETY INSTRUCTIONS – Emerson
- Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install by the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Preparation for Use
Unpacking And Set Up
- Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material are the only safe way to pack your radio to protect it from damage in transit.
- Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
- Note the serial number on the bottom of your radio and write this number in the space provided on the Warranty page of this manual.
- Place your radio on a level surface such as a table, desk, or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.
- Unwind the Line cord connecting the AC adapter and extend it to its full length.
The FM antenna is built into this cord. It must be fully extended to provide the best FM reception.
Power Source
This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that will void your warranty.
Location of Controls and Indicators
Front Panel
Top Panel
- 1 (AL 1’Radio’)Alarm Indicator
- 1 (AL 1’Buzzer’)Alarm Indicator.
- AM Indicator.(‘On’=AM;’Off’=PM)
- AUX Indicator.
- DAY OF WEEK Indicators. (MON, TUE, WED, THU, FRI, SAT, SUN)
- Back-Up Battery Compartment (Bottom Cabinet)
- LOW BATT. Indicator.
- FM Radio Indicator.
- 2 (AL 2 ‘Buzzer’) Alarm Indicator.
- 2 (AL 2 ‘Radio’) Alarm Indicator.
- Time/Date Display.
- Speaker (Back Cabinet).
- USB Charging.
- WEEK MODE Button. ABC(Weekdays/Weekends/Everyday Alarm)
- MONTH/DATE Setting / STORE Radio abcStation.
- TIME Setting / FM Frequency Display.
- TIME ZONE / MEMORY Button.
- RADIO ON / OFF Button.
- SNOOZE / SLEEP OFF / DIMMER Button.
- SLEEP Button(Sleep To Music Timer).
- TUNE / SET ▼ Button.
- ALARM 2 Setting / VOLUME- Button.
- ALARM 1 Setting / VOLUME+ Button.
- TUNE / SET ▲ Button.
- AUX IN Jack.
- AC adapter(Back Cabinet).
Setting The Time
Setting the Time Zone
The first time you connect your new SmartSet clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone.
There are 7 time zones programmed into your SmartSet clock radio as follows:
- ZONE 1 — Atlantic Time
- ZONE 2 — Eastern Time (Default Setting)
- ZONE 3 — Central Time
- ZONE 4 — Mountain Time
- ZONE 5 — Pacific Time
- ZONE 6 — Yukon Time
- ZONE 7 — Hawaiian Time
- Depress and hold 1.
- Press 2 until your time zone appears on the display, then release the buttons.
Date and Year Display
DATE DISPLAY(MM.DD):
- Depress 1.
YEAR DISPLAY(Y):
- Depress 1 together.
Manual Time Adjustments
- Depress and hold 1.
- Press 2 to adjust the time (hr: mm 12-hour time format).
- If hold 2, the display will continue to change rapidly.
Listening to The Radio
Tuning to The FM Radio
- Press 1 to turn the radio ‘On’ or ‘ Off’.
- Set the volume by pressing 2.
- Tune to your desired station by pressing 3 slightly to increase or decrease the receiving frequency by one step, or holding for one second and releasing to engage Auto Station Seeking until a station with acceptable reception is found.
Storing Station to the Memory
- Press 1 to turn the radio ‘On and tune it to the desired station as described.
- Press 2 indicating the memory location to store the current listening station.
- While ‘P XX’ is blinking, press 3 can change the memory location(P01~P10).
- Press 2 again, and the current listening station is stored.
Recalling Station from the Memory
- After the radio is ‘On’, press 1, ‘P XX’ shows on the display, and the station according to the memory location is tuned.
- Press 2 can change the memory location(P01~P10).
Enjoying Audio Sources with AUX IN Jack
- Press 1 to turn the radio ‘On’.
- Connect the audio source from its earphone jack to 2 with a 3.5mm Male-to-male stereo AUX cable (not included).
- “AUX” indicator 3 will light on while the AUX IN jack is plugged in.
- Start 4 to play the audio source.
Setting The Alarm
Wake To Radio and Radio Alarm Volume Setting
- Press 1 to turn the radio ‘On’.
- Press 3 or recall station from the Memory to select the station that you wish to hear when the alarm comes ‘On’.
- Press 2 to set the maximum radio volume at which the alarm will reach gradually at wake-up time.
- To have a softer radio volume (U07) at wake-up time, select a radio volume between U00 and U07.
Sleep to Music Timer
- Press 1 to turn on the sleep timer to play the radio.
- Hold 1 and press to change the display to the desired sleep time(2~90 minutes, default is 10 minutes).
- Press 3 to cancel the sleep timer and shut the radio ‘Off’.
3-Level Dimmer Control
If you find the clock display is too bright in a darkened room, set the DIMMER by pressing the SNOOZE/SLEEP OFF button, when the Radio is ‘Off’.
Changing The Lithium Battery
- When the LOW BATT indicator ‘Flashes’, you should change the battery that is used for the backup clock and alarm setting as well as for the Sure Alarm that can wake you up even if the power is ‘Off’ at the selected wake-up time.
- It will be ‘Off ’ when you have changed the battery in the correct instructions.
Resetting after Total Memory Loss
- While holding 1 and 2 buttons, press 3 to set the display to the correct year, then release the buttons.
- While holding 1 and 2 buttons, press to set the display to the correct year, then release the buttons.
- Resetting the time and alarm please follow the instructions on Setting The Time and Setting The Alarm.
USB Charging
Output 5V 1A for charging mobile phones or portable digital audio players.
CARE AND MAINTENANCE
Care Of Cabinets
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your radio.
Lithium Battery Precautions
- Dispose of the old battery properly. Do not leave it lying around where a young child or pet could play with, or swallow it. If the battery is swallowed, contact a physician immediately.
- The battery may explode if mistreated. Do not attempt to recharge it or disassemble it. Do not dispose of the old battery in a fire.
LIMITED WARRANTY
Emerson Radio Corp. warrants this product to be free from manufacturing defects in the original material, including original parts, and workmanship under normal home use and conditions (“manufacturing defect”) for ninety (90) days from the date of the original purchase in, and if used in the United States.
Should service be necessary under this warranty, Emerson will provide the following at our Return Repair Facility provided the manufacturing defect is verified along with the date of purchase:
- Pack the unit in a well-padded heavy corrugated box. Please ensure the item is well padded to avoid damage while in transit back to our facility. If the item incurs damage, it will NOT be replaced and the consumer will be responsible for return freight costs to receive the same unit back.
- Enclosed is your check or money order payable to Emerson Radio in the amount of ab$10 to cover return shipping and handling costs.
- Enclose a note with your name, address, phone number, Return Authorization number, and a brief reason for returning the unit.
The serial number can be found on the back cabinet. We suggest that you record the serial number of your unit in the space below for future reference.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Visit our website at emersonradio
- Model Number: CKS1708
- Serial Number:
FAQs About Emerson CKS1708 SmartSet Dual Alarm Clock Radio
How does the SmartSet alarm clock from Emerson operate?
A leap year or the transition to or from daylight savings time will not deceive the SmartSet clock radio. For almost a century, the integrated computer chip has automatically adjusted for any time changes. A battery backup mechanism maintains accurate time even in the case of a blackout.
How is the Emerson clock’s alarm set?
It merely takes a moment to complete the really easy instructions. To set the alarm time, merely depress the alarm button and press the hour and minute keys. Additionally, it offers a dual alarm setting that allows you to program two distinct alarm times without constantly having to reset.
How can I tell if the time on my alarm clock is AM or PM?
If it’s digital, the AM and PM are indicated by a dot. You have to set the clock before going to bed each night and turn it off in the morning if it has a round face with hands and 12 hours on it. If not, it will go off in the morning and the evening.
How do I silence the alarm while keeping it on?
The alarm sound is unaffected by Silent mode, the Ring/Silent switch, and Do Not Disturb. The alarm continues to ring even if you use the Action button, Ring/Silent switch, or Do Not Disturb setting.
Will the alarm clock shut off on its own?
Most clocks automatically turn off the alarm if left alone for a sufficient amount of time; to turn off the light or sound, touch a button or handle on the clock.
Who is in charge of the clock?
The International Earth Rotation and Reference Systems Service, or IERS, is in charge of overseeing global time coordination.
What is the power consumption of an alarm clock radio?
A simple analog alarm clock without any additional functions, like a radio or snooze button, may consume less than one watt of electricity, as a general estimate. A digital alarm clock with extra functions like a radio or display light may require two to five watts of power.
Emerson Smartest: What is it?
As soon as you plug in your clock, our Smartest technology instantly adjusts it to the appropriate Year, Month, Day, and Time.
Does Emerson Radio still operate?
It is still regarded as one of the most reputable brands in the consumer electronics sector. The Emerson Company is renowned for producing high-caliber, cutting-edge technology today.
Is WiFi required for an alarm clock?
If there is no WiFi available when the alarm goes off, it will still sound. The gadget is worthless without power. The alarm clock will keep sound at the scheduled hour even after the electricity is restored.
For More Manuals by Emerson, Visit Latest Manuals
