BUNN CSB2G Speed Brew Elite Coffee Maker Owner Manual

BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-featured

BUNN-LOGO

BUNN CSB2G Speed Brew Elite Coffee Maker

BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-PRODUCT

About BUNN

Bunn-O-Matic Corporation (BUNN®) has led the way in the production of dispensed beverage equipment since 1957. BUNN, a global partner you can rely on for dependable beverage equipment and exceptional post-purchase service wherever customers are served, was founded on five generations of family entrepreneurship.

With the help of the company’s brand promise Coffee Brewer, A Partner You Can Count OnTM, BUNN has built a devoted global network of home and business clients based on its basic principles of honesty, integrity, and mutual respect.

To satisfy evolving consumer demands, BUNN has adopted cutting-edge new technologies and is still dedicated to providing the best beverage possible Coffee Brewer in every cup for every occasion. A selection of home brewers and a comprehensive range of commercial beverage dispensing solutions are offered by the equipment portfolio.

These solutions include multi- and single-cup coffee and iced tea brewers, superautomatic espresso machines, coffee bean grinding systems, dispensers for exceptional-tasting cold or hot beverages (such as juice, lemonade, hot chocolate, cappuccino, and iced coffee Coffee Brewer), liquid coffee dispensers, gourmet ice systems, water quality systems, precise temperature water systems, paper filters, and other related items.

GETTING STARTED

Record the model and date code before using. The model and date code are located on the bottom of your coffee maker.

MODEL:
GRX, BX, SBS, CSB1, CSB2, BTX or CSB3T
DATE CODE:

COFFEE MAKER FEATURES

FEATURES

BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-1

  1. Brew Funnel
  2. Lid
  3. Internal Hot Water Tank
  4. Drip-Free Glass Carafe
  5. Carafe Lid
  6. Warmer Plate
  7. Sprayhead
  8. Warmer Switch
  9. Tank Power Switch
  10. Pour-In Bowl
  11. Thermal Carafe
  12. Thermal Carafe Lid
  13. Base
  14. Top Cover

SAFEGUARDING

IMPORTANT

Follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

  • READ ALL THE INSTRUCTIONS IN THIS MANUAL.
  • Use caution. This coffee maker produces hot liquids: hot liquids can burn you
  • Place and use the coffee maker on a level surface.
  • Do not touch hot surfaces. Use handles.
  • Do not tip the coffee maker.
  • To protect against electric shock, do not place cords, plugs, or coffee maker in water or other liquids.
  • Do not open the lid during brewing.
  • Close supervision is necessary when a coffee maker is used around children.
  • The internal hot water tank contains hot water. Before cleaning, removing,, or replacing parts, press the power switch off, unplug the coffee maker, and let it cool (up to 2 hours.)
  • Do not operate the coffee maker with a damaged cord or plug, or any other malfunction or damage. Return the appliance to an authorized service facility for examination, repair, or adjustment.
  • Using an accessory not evaluated for use with this coffee maker may cause injury.
  • Use a coffee maker indoors only.
  • Do not let the cord hang over the edge of the table or counter.
  • Do not place the coffee maker in or near a hot gas or electric burner, in a heated oven, or any other heated area.
  • Do not use a carafe on a range top or in a microwave.
  • Do not use the coffee maker for any purpose other than its intended use.
  • Do not remove the brew funnel or carafe while brewing.
  • Do not set a hot carafe on a cold surface.
  • Do not use a cracked carafe or a carafe with a loose or weakened handle.
  • Do not pour any liquid into the internal hot water tank other than water or vinegar for cleaning, as specified in this manual.
  • Do not clean the carafe with cleansers, steel wool pads, or other abrasive materials.
  • When the coffee maker is not in use, keep the lid in the closed position.
  • To disconnect, turn any control to the OFF position, then unplug from the wall outlet.

INITIAL SETUP

BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-2

DO NOT PLUG IN THE COFFEE MAKER UNTIL STEP 5, OR YOU RISK PERMANENTLY DAMAGING THE MACHINE.

Follow the steps on the next page for proper setup.

BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-3 BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-4

  1. Slide empty brew funnel into funnel rails.
  2. Fill the carafe with water. Pour Water into the coffee maker.
  3. Place the carafe under the funnel. Close lid. Wait 4 minutes while the internal tank fills.
  4. Repeat steps 2 and 3, until water flows from the funnel.
  5. Plug in the coffee maker.
  6. Press the power switch located on the side. (I=ON, O=OFF) Wait 15 minutes for water in the tank to heat.

HOW TO BREW

  1. Place a BUNN® coffee filter into the brew funnel
  2. Scoop ground coffee into the filter
  3. Gently shake the brew funnel to level the grounds
  4. Slide the funnel into the funnel rails
  5. Fill the carafe with water: 20oz for 4 cups, 50oz for 10 cups.
  6. Open the lid, and pour water into the coffee maker
  7. Position the carafe on the warmer plate (or on the base for Thermal models*)
  8. Close the lid**
  9. Turn on the warmer switch
  10. Wait 4 minutes for the drip-out to complete

BASIC CLEANING

FOR SPEED BREW MODELS: (Excluding Thermal models)

  • Wash the brew funnel and glass carafe after each use.
  • Both are top-rack dishwasher safe.

Important: Separate the carafe lid from the carafe when washing in the dishwasher, and use the top shelf only for both the glass and the lid. If washing by hand, use a mild, non-abrasive dish soap.

  • Wipe the outside of the coffee maker occasionally, including the area above the brew funnel.

NOTE: After wipe down, ensure that the warmer switch is in the OFF position.

FOR THERMAL MODELS:

Important: Do not use an abrasive device to clean the carafe, because it will scratch the stainless steel. Occasionally, remove the brew-through valve on the Thermal Carafe lid and clit ean with mild, nonabrasive detergent.

To remove the valve, lift it at the edge and pull it up. Be sure to clean the passage where the valve is located (the valve is not on all models).

  • To remove coffee stains from inside the thermal carafe, place a paper filter in the brew funnel and pour 2 teaspoons of powder dishwasher detergent into the brew funnel.
  • Pour one carafe of water into the coffee maker.
  • Place the carafe under the funnel and close the lid.
  • When the brewing cycle stops, remove the brew funnel and discard the filter.
  • Rinse the funnel.
  • Allow the carafe to sit for about 15 minutes.
  • Use a soft-bristled brush to clean the inside and outer rim of the carafe.
  • Scrub the car and pour the lip and lid with a soft cloth, warm water, and mild detergent.
  • When finished, pour out the solution in the carafe.
  • Rinse the carafe and the lid.

ROUTINE CLEANING

Routinely clean your coffee maker every 3 months. More frequency may be needed, depending on the mineral content in your water.

You will need 1 quart (32oz) of white vinegar, a toothpick, and dish soap.

  • Slide the brew funnel into the funnel rails.
  • Place the carafe under the funnel.
  • Open the lid and pour the vinegar into the coffee maker.
  • Close the lid. Empty the carafe when the liquid stops flowing.
  • Flip the tank switch to the OFF position and unplug the coffee maker. Allow the vinegar to sit in the coffee maker for at least 2 hours.
  • Remove the brew funnel and unscrew the spray head. Check the spray head holes and clear any deposits with the toothpick.
  • Clean the spray head with a cloth and dish soap.
  • Rinse with water.
  • Pour a carafe of fresh water into the coffee maker. Place the carafe under the funnel and reinsert the funnel.
  • Close the lid (the water will begin to flush out the vinegar from the internal hot water tank).
  • Empty the carafe when the liquid stops flowing.
  • Repeat the process of cycling fresh cold water 3 or more times, or until you no longer smell vinegar.
  • Remove the funnel and reattach the spray head.
  • Replace the funnel and place the carafe under the funnel. Plug in the coffee maker. Flip the tank switch to the ON position.
  • Allow the water in the tank to reach brewing temperature (which should take about 15 minutes). Your coffee maker is again ready for brewing.

DRAINING THE COFFEE MAKER

WATER IN THE COFFEE MAKER SHOULD BE DRAINED WHEN THE COFFEE MAKER IS:

  • Transported
  • Shipped
  • Stored in an unheated location with a chance of freezing
  • Not to be used for an extended period

TO DRAIN:

BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-5

  1. Flip the tank switch to the OFF position, unplug the coffee maker, and allow it to cool for at least 2 hours.
  2. Remove the funnel and the spray head, loosening with your fingertips.
  3. Grasp the back of the coffee maker and turn it upside down over a sink.
  4. Continue tipping the coffee maker until the flow from the spray head tube and lid stops.
  5. Attach the spray head and insert the funnel into the coffee maker.
  6. Return the coffee maker to the upright position.

TROUBLESHOOTING

BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-6 BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-7 BUNN-CSB2G-Speed-Brew-Elite-Coffee-Maker-fig-8

WARRANTY

BUNN® Speed Brew Coffee maker, except glass carafe, to be free from defects in materials and workmanship existing at the time of manufacture and appearing within the later of the following warranty periods: a) Three (3) years from the date of original purchase of a NEW Coffee maker with delivery of a valid receipt evidencing such purchase or, in the absence of such a receipt, from the date of manufacture; or b) One (1) year from the date a REPAIRED OR REPLACEMENT Coffee maker is received by customer, in the case BUNN determined a coffee maker returned within the NEW Coffee maker warranty period required repair or replacement.

If such a defect appears during the warranty period, we will (at our sole option) repair or replace the defective Coffee maker with no charge for service or parts, provided the Coffee maker is delivered at the customer’s expense to one of our authorized service centers (see page 4 for customer service info).

Warranty does not cover claims resulting from misuse, failure to follow instructions on installation and use, use with water having a high mineral content, neglect, use of unauthorized attachments,

commercial use, use on a current or voltage other than specified on the Coffee maker, or unauthorized service during the warranty period on conditions otherwise covered by the warranty.

In any event, the duration of any warranties implied by law, including but not limited to any implied warranties of merchantability or fitness for a particular purpose, is expressly limited to the duration of this limited warranty. Some states do not allow time limitations on implied warranties, so the above limitation may not apply to you.

Some states do not allow limitation or exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

SPECIFICATIONS

  • BREW CAPACITY: 4 to 10 (5) oz. cups per batch
  • ELECTRICAL: UL and C-UL Listed FOR HOUSEHOLD USE ONLY. The coffee maker has an attached, 3-prong grounded cord set and requires 2-wire service with the ground.

ELECTRICAL RATED:

  • GRX: 120 volts AC, 7.5 amps, single phase, 60 Hz, 900-watts
  • BX: 120 volts AC, 7.5 amps, single phase, 60 Hz, 900-watts
  • SBS: 120 volts AC, 7.5 amps, single phase, 60 Hz, 900-watts
  • CSB1: 120 volts AC, 7.5 amps, single phase, 60 Hz, 900-watts
  • CSB2: 120 volts AC, 7.5 amps, single phase, 60 Hz, 900-watts
  • BTX: 120 volts AC, 7 amps, single phase, 60 Hz, 850-watts
  • CSB3T: 120 volts AC, 7 amps, single phase, 60 Hz, 850-watts

Not designed for High Altitude locations above 4,000 feet. High Altitude units are available. See BUNN.COM for details.

For More Manuals by BUNN, Visit Latest Manuals

BUNN CSB2G Speed Brew Elite Coffee Maker Owner Manual 12 BUNN CSB2G Speed Brew Elite Coffee Maker Owner Manual [pdf]

Leave a Reply