Bracwiser MD71221 Monitor Mount Single Fully Adjustable Arm
Unboxing Instruction
Please open the box carefully and remove protection such as lining and covers. Check all parts and make sure all components and parts are not damaged. Do not use damaged components or parts. Read this manual before installation.
Important Safety Information
Please be careful during installation and operation. Read this manual before installation. Follow the manual and use tools as advised in the package. Installation needs to be completed by a professional or under others’ help Do not disassemble any components if there is no instruction in the manual. We are not responsible for any loss due to incorrect installation or use of this item.
PARTS
- (3) pole-a
- (1) Grommet/ clamp-b
- (1)Grommet/ clamp support-c
- (1)Swivel arm-d
- (1)VESA plate-e
- (3)M5x18-f
- (3)wire clip-g
- (2) arm wire clip-h
- (1)S3/S4/S5 wrench-i
- (4)M4x30-G1
- (4)M4x12 -G2
- (4)Spacer -H1
- (4) Spacer -H2
- (4)Ф4 Washer-F
INSTALLATION
Step 1 Install the Pole on a Desk
Option A: Clamp installation
- Connect clamp support (c) and pole (a) with 3 pieces of M5x18 (f) and tighten it with a wrench (i) (figure 1).
- Connect clamp (b) and clamp support (c) with pre-positioned screws and choose the proper hole to sit according to the thickness of the desk (figure 2). Tighten the plastic knob to fix the clamp (figure 3)
Option B: Grommet installation
- Connect grommet support (c) and pole (a) with 3 pieces of M5x18 (f) and tighten it with a wrench (i) (figure 1). Insert grommet support (c) into a desk hole whose diameter is over 1.65in/42mm (figure 2).
- Connect grommet (b) and grommet support (c) with pre-positioned screws and choose the proper hole site according to the thickness of the desk (figure 3). Tighten the plastic knob to fix the clamp (figure 4).
Step 2 Connect the Swivel Arm and Pole
- Place pole wire clip (g) on the pole (a).
- Place arm wire clip (h) on the swivel arm (d).
- Place swivel arm (d) on pole (a). Tighten with a wrench (i) at the proper position.
Step 3 Connect the VESA Plate and Monitor
WARNING:
Make sure the screws are tightened.
Step 4 Connect Monitor and Mount
- Insert the monitor into the head of the swivel arm
- Drive screw pre-positioned in the plate into the screw hole in the head of the swivel arm
Step 5 Angle Adjustment of Head Sleeve
- Adjust the head of the swivel arm according to the needs in case of sagging of the monitor.
- To adjust the height of the monitor, tighten or loosen the screw, and fix the plate by tightening the nut at the proper position.
Step 6 Cable Management
Make adjustments with a wrench (i). Manage cables with arm wire clip (h) and pole wire clip (g).
we hope you never have the need, but if you do, our service is friendly and hassle-free.
after-sales@bracketwiser.com
For More Manuals by Bracwiser, Visit LatestManuals
FAQs About Bracwiser MD71221 Monitor Mount Single Fully Adjustable Arm
What is the lifespan of a monitor arm?
Furthermore, these arms may need yearly maintenance due to extended use or slow gas leaks. Even yet, their ROI is naturally lowered because they might not survive for more than five years. But as times have changed, high-end hydraulic arms that readily last ten to fifteen years are now accessible.
How much weight is supported by a monitor arm?
The arm will raise and stay at its highest point if the monitor weighs less than 0.5 kg (1.1 lbs), whereas the arm will descend and remain close to its lowest point if the monitor weighs more than 15 kg (33 lbs).
Is a TV supported by a monitor arm?
There are at least four distinct threads or holes, depending on the weight and size of the screen. By using the VESA standard, you can mount your TV on a wall, table, or ceiling monitor.
Is it possible for me to mount any monitor?
Yes, most displays can generally be mounted on a monitor arm. Typically, monitors feature a standard VESA hole design on the back that may be used to attach to a monitor arm, measuring either 75 x 75 mm or 100 x 100 mm.
Is my table able to support a monitor arm?
In case your desktop is extremely thin—say, 10 mm or less—a monitor arm might not be appropriate. Once the monitor is placed, check the distribution of weight. Once more, harm is a possibility if the desktop isn’t solid enough. The majority of PCs for commercial office furniture with a 24 mm thickness should work OK.
Do monitor arms have a purpose?
“Scientific research shows 10-15% more productivity, 33% less errors when using two or three screens.” The correct monitor arm allows you to change the height, depth, and angle of your monitor so you may work in the most comfortable position and with the least amount of discomfort.
Is a laptop compatible with a monitor arm?
With a Laptop Monitor Stand Mount, you can maximize your workspace by lifting a laptop over the desk! With the laptop holder for monitor mounts, you can set up a dual-display workstation by raising your laptop to eye level and aligning it with the height of your monitor.
Will arms for monitors work on any monitor?
Are monitor arms compatible with all monitors? It is advisable to confirm that the monitor is VESA “Compliant,” as the majority of monitor arms adhere to these criteria. Yes, if both of them are abiding by the regulations. I’ve never had a problem with this, but then again, I haven’t owned a non-VESA monitor since the days of CRTs.
Do screws come with monitor mounts?
Almost every monitor arm/stand kit available will include screws, spacers, and occasionally washers. Not every monitor that is VESA compatible has the same screws.
Can a TV serve as my monitor?
A TV can be used as a monitor, however some adjustments may be necessary. Most modern PCs and HDTVs should be easy to connect to; you just might need to verify a few settings and get a unique connection if your PC’s outputs and your HDTV’s inputs are different.
What kind of mount does my monitor have?
Your monitor will have four screw holes on the back if it is VESA mount compliant. All you have to do is measure the distance between the holes to find your mount size. The most popular VESA Mount sizes are indicated here. VESA Mount sizing is expressed in millimeters.
Do arms for monitors fit into glass desks?
It is not a good idea to mount a monitor arm on a glass desk; instead, you should take certain safety measures and take the desk’s and the arm’s weight capacities into account.
How can I secure my monitor arm in position?
To assume the desired position, move the arms forward or backward. Tighten the tension and maintain the arms’ position by rotating the Allen wrench in a clockwise manner. If changes are required for the other arm as well, follow the same procedure.
How long are arms used for monitors?
Monitor arms ought to last for a very long time. We have selected products with a minimum of 10-year warranties. Clear instructions and VESA support for simple monitor mounting are features found in the best monitor arms.
Like a TV, can a monitor be mounted?
The short answer is that if the mounting hole pattern and weight capacity match, you can use a TV wall mount for your computer monitor. Here are some pointers on selecting the appropriate TV wall mount for your monitor and things to consider when setting it up.
Do monitor mounts conserve room?
An efficient way to improve workplace space and cable management is with monitor arms. They make it simple to change the monitor’s position, which helps to keep a desk area neater and more organized
Are mounting holes present on every monitor?
A: Yes, Carey, they do. The’vesa’ standard is adhered to by all manufacturers. Any TV can be attached to a mount from any other business in this manner.