ASRock H510M-HDV Compatible with Intel 10th and 11th Generation CPUs User Manual

ASRock H510M-HDV Compatible with Intel 10th and 11th Generation CPUs

Introduction

Thank you for purchasing ASRock H510M-HDV/M.2 SE motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice.

In case any modifications to this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.

Package Contents

• ASRock H510M-HDV/M.2 SE Motherboard (Micro ATX Form Factor)
• ASRock H510M-HDV/M.2 SE User Manual
• 1 x I/O Shield
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x Screw for M.2 Socket (Optional)

Specifications

Platform	•    Micro ATX Form Factor
CPU	•    Supports 10th Gen & 11th Gen Intel® CoreTM Processors (LGA1200)   •    Supports Intel® Turbo Boost Max 3.0 Technology
Chipset	•    Intel® H470
Memory	•    Dual Channel DDR4 Memory Technology•    2 x DDR4 DIMM Slots •    Supports DDR4 3200/2933/2800/2666/2400/2133 non-ECC, un-buffered memory*   •    Supports ECC UDIMM memory modules (operate in non- ECC mode) •    Max. capacity of system memory: 64GB •    Supports Intel® Extreme Memory Profile (XMP) 2.0 •    15μ Gold Contact in DIMM Slots *  11th Gen Intel® CoreTM (i9/i7/i5) support DDR4 3200 natively; CoreTM (i3), Pentium® and Celeron® support DDR4 2666 natively. *  10th Gen Intel® CoreTM (i9/i7) support DDR4 2933 natively; CoreTM (i5/i3), Pentium® and Celeron® support DDR4 2666 natively. *  Please refer to the Memory Support List on ASRock’s website for more information. (http://www.asrock.com/)
Expansion Slot	Intel® 11th Gen & 10th Gen Processors:•    1 x PCIe 4.0 x16 Slot (PCIE1)* Intel® 11th Gen Processors support PCIe 4.0 x16 Intel® 10th Gen Processors support PCIe 3.0 x16 Intel® H470 Chipset: •    1 x PCIe 3.0 x1 Slot (PCIE2)*   * Supports NVMe SSD as boot disks
Graphics	•    Intel® UHD Graphics Built-in Visuals and the VGA outputs can be supported only with processors that are GPU integrated.

	•    Graphics specifications may vary between CPU types.•    1 x HDMI Intel® 11th Gen Processors support HDMI 2.0, HDCP 2.3, and max. resolution up to 4K 60Hz Intel® 10th Gen Processors support HDMI 1.4, HDCP 2.3, and max. resolution up to 4K 30Hz •    1 x DVI-D, supports HDCP 2.3 and max. resolution up to Full HD (1920×1200) 60Hz •    1 x D-Sub, supports max. resolution up to Full HD (1920×1200) 60Hz
Audio	•    7.1 CH HD Audio (Realtek ALC897 Audio Codec)
LAN	•    Gigabit LAN 10/100/1000 Mb/s•    Realtek 8111H
USB	•    6 x USB 3.2 Gen1 (4 Rear, 2 Front)•    6 x USB 2.0 (2 Rear, 4 Front) * All USB ports support ESD Protection
Rear Panel I/O	•    1 x PS/2 Mouse/Keyboard Port•    1 x D-Sub Port •    1 x DVI-D Port •    1 x HDMI Port •    2 x USB 2.0 Ports •    4 x USB 3.2 Gen1 Ports •    1 x RJ-45 LAN Port •    HD Audio Jacks: Line in / Front Speaker / Microphone
Storage	Chipset:•    1 x Ultra M.2 Socket (M2_1, Key M), supports type 2260/2280 SATA3 6.0 Gb/s & PCIe Gen3x4 (32 Gb/s) modes* •    4 x SATA3 6.0 Gb/s Connectors   * Supports Intel® OptaneTM Technology * Supports NVMe SSD as boot disks
RAID	•    Supports RAID 0, RAID 1, RAID 5, and RAID 10 for SATA

Connector	•    1 x COM Port Header•    1 x SPI TPM Header •    1 x Chassis Intrusion and Speaker Header •    1 x CPU Fan Connector (4-pin)* •    1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)** •    2 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control)*** •    1 x 24-pin ATX Power Connector
	•    1 x 8 pin 12V Power Connector•    1 x Front Panel Audio Connector •    2 x USB 2.0 Headers (Support 4 USB 2.0 ports) •    1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports) * CPU_FAN1 supports the fan power up to 1A (12W). ** CPU_FAN2/WP supports the fan power up to 2A (24W). *** CHA_FAN1~2/WP support the fan power up to 2A (24W). *** CPU_FAN2/WP and CHA_FAN1~2/WP can auto-detect if a 3-pin or 4-pin fan is in use.
BIOSFeature	•    AMI UEFI Legal BIOS with GUI support
OS	•    Microsoft® Windows® 10 64-bit / 11 64-bit
Certified- options	•    FCC, CE•    ErP/EuP ready (ErP/EuP ready power supply is required)

 

For detailed product information, please visit our website: http://www.asrock.com

WARNING:

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system.

It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.

Motherboard Layout

 

No.	Description
1	ATX 12V Power Connector (ATX12V1)
2	CPU Fan Connector (CPU_FAN1)
3	2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4	Chassis/Water Pump Fan Connector (CHA_FAN1/WP)
5	ATX Power Connector (ATXPWR1)
6	USB 3.2 Gen1 Header (USB32_5_6)
7	SATA3 Connectors (SATA3_0)(Upper), (SATA3_1)(Lower)
8	SATA3 Connectors (SATA3_2)(Upper), (SATA3_3)(Lower)
9	SPI TPM Header (SPI_TPM_J1)
10	System Panel Header (PANEL1)
11	Chassis Intrusion and Speaker Header (SPK_CI1)
12	Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
13	USB 2.0 Header (USB_5_6)
14	USB 2.0 Header (USB_3_4)
15	Clear CMOS Jumper (CLRMOS1)
16	COM Port Header (COM1)
17	CPU/Water Pump Fan Connector (CPU_FAN2/WP)
18	Front Panel Audio Header (HD_AUDIO1)

 

I/O Panel

No.	Description	No.	Description
1	D-Sub Port	7	USB 3.2 Gen1 Type-A Ports (USB32_34)
2	PS/2 Mouse/Keyboard Port	8	USB 2.0 Ports (USB_12)
3	LAN RJ-45 Port*	9	USB 3.2 Gen1 Type-A Ports (USB32_12)
4	Line In (Light Blue)**	10	DVI-D Port
5	Front Speaker (Lime)**	11	HDMI Port
6	Microphone (Pink)**

 

There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED		Speed LED
Status	Description	Status	Description
Off	No Link	Off	10Mbps connection
Blinking	Data Activity	Orange	100Mbps connection
On	Link	Green	1Gbps connection

 

The function of the Audio Ports in 7.1-channel Configuration:

Port	Function
Light Blue (Rear panel)	Rear Speaker Out
Lime (Rear panel)	Front Speaker Out
Pink (Rear panel)	Central /Subwoofer Speaker Out
Lime (Front panel)	Side Speaker Out

Block Diagram

Installation

• This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damage to motherboard components.
• To avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also, remember to use a grounded wrist strap or touch a safety-ground object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.

Installing the CPU

1. Before you insert the 1200-pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if the above situation is found. Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.

Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after-service.

Installing the CPU Fan and Heatsink

Installing Memory Modules (DIMM)

This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots and supports Dual Channel Memory Technology.

1. For dual channel configuration, you always need to install identical (the same brand, speed, size, and chip type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one memory module installed.
3. It is not allowed to install a DDR, DDR2, or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.
4. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at an incorrect orientation.

Connecting the Front Panel Header

Installing the I/O Panel Shield

Installing the Motherboard

Installing SATA Drives

Installing a Graphics Card

Expansion Slots (PCIe Slots)
There are 2 PCI Express slots on the motherboard.

WARNING: Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make the necessary hardware settings for the card before you start the installation.

PCIe slots:
PCIE1 (PCIe 4.0 x16 slot) is used for PCIe x16 lane-width graphics cards. PCIE2 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.

CONNECTING

Connecting Peripheral Devices

Connecting the Power Connectors

Power On

Jumpers Setup

The illustration shows how jumpers are set up. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”.

Clear CMOS Jumper

CLRMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to the default setup, please turn off the computer and unplug the power cord, then use a jumper cap to short the pins on CLRMOS1 for 3 seconds. Please remember to remove the jumper cap after clearing the CMOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action.

Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.

System Panel Header

Connect the power button, reset button, and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

PWRBTN (Power Button):

Connect to the power button on the chassis front panel. You may configure the way to turn off your system using the power button.

RESET (Reset Button):

Connect to the reset button on the chassis front panel. Press the reset button to restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the system is in an S1/S3 sleep state. The LED is off when the system is in an S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data. The front panel design may differ by chassis. A front panel module mainly consists of the power button, reset button, power LED, hard drive activity LED, speaker, etc.

When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assignments are matched correctly.

Chassis Intrusion and Speaker Header

Please connect the chassis intrusion and the chassis speaker to this header.

Serial ATA3 Connectors

Right Angle:

• (SATA3_0) (see p.5, No. 7) (Upper)
• (SATA3_1) (see p.5, No. 7) (Lower)
• (SATA3_2) (see p.5, No. 8) (Upper)
• (SATA3_3) (see p.5, No. 8) (Lower)

These four SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate.

USB 2.0 Headers

• (9-pin USB_5_6) (see p.5, No. 13)
• (9-pin USB_3_4) (see p.5, No. 14)

There are two headers on this motherboard. Each USB 2.0 header can support two ports.

USB 3.2 Gen1 Header
(19-pin USB32_5_6) (see p.5, No. 6)
There is one header on this motherboard. This USB 3.2 Gen1 header can support two ports.

Front Panel Audio Header
(9-pin HD_AUDIO1) (see p.5, No. 18)
This header is for connecting audio devices to the front audio panel.

High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system.

Chassis/Water Pump Fan Connectors

• (4-pin CHA_FAN1/WP) (see p.5, No. 4)
• (4-pin CHA_FAN2/WP) (see p.5, No. 12)

This motherboard provides two 4-pin water cooling chassis fan connectors. If you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3.

CPU Fan Connector
(4-pin CPU_FAN1) (see p.5, No. 2)
This motherboard provides a 4-pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3.

CPU/Water Pump Fan Connector
(4-pin CPU_FAN2/WP) (see p.5, No. 17)
This motherboard provides a 4-pin water-cooling CPU fan connector. If you plan to connect a 3-Pin CPU water cooler fan, please connect it to Pin 1-3.

ATX Power Connector
(24-pin ATXPWR1) (see p.5, No. 5)
This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13.

ATX 12V Power Connector
(8-pin ATX12V1) (see p.5, No. 1)
This motherboard provides an 8-pin ATX 12V power connector. To use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5.

Warning: Please make sure that the power cable connected is for the CPU and not the graphics card. Do not plug the PCIe power cable into this connector.

SPI TPM Header
(13-pin SPI_TPM_J1) (see p.5, No. 9)
This connector supports the SPI Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.

Serial Port Header
(9-pin COM1) (see p.5, No. 16)
This COM header supports the serial port module.

M.2 SSD Module Installation Guide (M2_1)

The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1, Key M) supports type 2260/2280 SATA3 6.0 Gb/s & PCIe Gen3x4 (32 Gb/s) modes.

Installing the M.2 SSD Module

Step 1
Prepare an M.2 SSD module and the screw.

Step 2
Depending on the PCB type and length of your M.2 SSD module, find the corresponding nut location to be used.

No.	1	2
Nut Location	A	B
PCB Length	6cm	8cm
Module Type	Type 2260	Type 2280

 

Step 3: Move the standoff based on the module type and length.
The standoff is placed at the nut location B by default. Skip Steps 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand.

Step 4
Peel off the yellow protective film on the nut to be used. Hand-tighten the standoff into the desired nut location on the motherboard.

Step 5
Align and gently insert the M.2 SSD module into the M.2 slot. Please be aware that the M.2 SSD module only fits in one orientation.

Step 6
Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.

For the latest updates of the M.2 SSD module support list, please visit our website for details: http://www.asrock.com

Version 1.0
Published March 2023
Copyright©2023 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form, or by any means, except duplication of documentation by the purchaser for backup purposes, without the written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owner’s benefit, without intent to
infringe.

Disclaimer

Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.

• Concerning the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
• In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business, and the like), even if
• ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

IMPORTANT – READ BEFORE COPYING, INSTALLING OR USING. LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software only in its unmodified and binary form, (with the accompanying documentation, the “Software”) for Licensee’s personal use only, and not commercial use, in connection with Intel-based products for which the Software has been provided, subject to the following conditions:

• Licensee may not disclose, distribute, or transfer any part of the Software, and You agree to prevent unauthorized copying of the Software.
• Licensee may not reverse engineer, decompile, or disassemble the Software.
• Licensee may not sublicense the Software.
• The Software may contain the software and other intellectual property of third-party suppliers, some of which may be identified in, and licensed under, an enclosed license.txt file or other text or file.
• Intel has no obligation to provide any support, technical assistance, or updates for the Software.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its licensors or suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions.

Licensee may not remove any copyright notices from the Software. Except as otherwise expressly provided above, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. Transfer of the license terminates the Licensee’s right to use the Software.

DISCLAIMER OF WARRANTY

The Software is provided “AS IS” without warranty of any kind, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

LIMITATION OF LIABILITY. NEITHER INTEL NOR ITS LICENSORS OR SUPPLIERS WILL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

• LICENSE TO USE COMMENTS AND SUGGESTIONS. This Agreement does NOT obligate the Licensee to provide Intel with comments or suggestions regarding the Software. However, if the Licensee provides Intel with comments or suggestions for the modification, correction, improvement, or enhancement of (a) the Software or (b) Intel products or processes that work with the Software, the Licensee grants to Intel a non-exclusive, worldwide, perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense, under Licensee’s intellectual property rights, to incorporate or otherwise utilize those comments and suggestions.
• TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license at any time if the Licensee is in breach of any of its terms or conditions. Upon termination, Licensee will immediately destroy or return to Intel all copies of the Software.
• THIRD-PARTY BENEFICIARY. Intel is an intended beneficiary of the End User License Agreement and has the right to enforce all of its terms.
• U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide the Software to the U.S. Government. The contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95054.
• EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will export/re-export the Software, directly or indirectly, to any country for which the U.S. Department of Commerce or any other agency or department of the U.S. Government or the foreign government from where it is shipping requires an export license, or other governmental approval, without first obtaining any such required license or approval. In the event the Software is exported from the U.S.A. or re-exported from a foreign destination by Licensee, Licensee will ensure that the distribution and export/re-export or import of the Software complies with all laws, regulations, orders, or other restrictions of the U.S. Export Administration Regulations and the appropriate foreign government.
• APPLICABLE LAWS. This Agreement and any dispute arising out of or relating to it will be governed by the laws of the U.S.A. and Delaware, without regard to conflict of laws principles. The Parties to this Agreement exclude the application of the United Nations Convention on Contracts for the International Sale of Goods (1980). The state and federal courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute arising out of or relating to this Agreement. The Parties consent to personal jurisdiction and venue in those courts. A Party that obtains a judgment against the other Party in the courts identified in this section may enforce that judgment in any court that has jurisdiction over the Parties.

Licensee’s specific rights may vary from country to country.

WARNING
THIS PRODUCT CONTAINS A BUTTON BATTERY If swallowed, a button battery can cause serious injury or death. Please keep batteries out of sight or reach of children.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate”

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel: +886-2-28965588 ext.123 (Standard International call charges apply)

• ASRock INC. hereby declares that this device complies with the essential requirements and other relevant provisions of related UKCA Directives. Full text of UKCA declaration of conformity is available at: http://www.asrock.com
• ASRock INC. hereby declares that this device complies with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: http://www.asrock.com
• ASRock follows the green design concept to design and manufacture our products and makes sure that each stage of the product life cycle of ASRock product is in line with global
  environmental regulations. In addition, ASRock discloses the relevant information based on regulation requirements.
• Please refer to https://www.asrock.com/general/about.asp?cat=Responsibility for information disclosure based on regulation requirements ASRock is complied with.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.

This symbol of the crossed-out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for the disposal of electronic products.

For More Manuals by ASRock, Visit Latest Manuals

FAQs About ASRock H510M-HDV Compatible with Intel 10th and 11th Generation CPUs