Amazon Basics 4-Shelf Adjustable, Heavy-Duty Storage Shelving Unit
Instruction
Make sure that the package contains the following parts:
Safety and Compliance
- Warning: Do not let children climb on or play with the unit.
- Handle with care.
- Two adults are recommended for ease of assembly.
- Regularly check if all screw connections are tight and if all shelves are attached stably.
- To avoid scratching the floor, assemble the shelving unit on a soft surface such as a carpet.
- Load the unit evenly and place the heaviest items on the lower shelves.
Assembly Instructions
- Remove the protective covers E from the shelves A and dispose of them.
- Attach one half of the plastic sleeve D to each lower rod. Then attach the other half of the plastic sleeve to each lower rod, so both halves are connected. The arrow above the TOP marks on the plastic sleeves should point upwards. Four plastic sleeves are necessary to support one shelf.
- Put the first shelf A onto the rod C and lower it down until it rests on the plastic sleeves D.
- Attach another set of plastic sleeves to each lower rod for the second shelf from the bottom.
- Put the next shelf A onto the rod C and lower it down until it rests on the plastic sleeves D.
- Screw the upper rod B onto the lower rod C in a clockwise direction.
- Attach one set of plastic sleeves D to the upper rods B.
- Put the next shelf A onto rod B and lower it down until it rests on the plastic sleeves D.
- Attach the last set of plastic sleeves to the upper rods.
- Put the last shelf A onto the rod B and lower it down until it rests on the plastic sleeves D.
- Use a rubber mallet to level each shelf. Place some cardboard on the shelf and gently tap the corners of each shelf until level.
Specifications
Measurements (W x D x H) US Standard Metric
- Shelving unit approx. 35.75 x 13.85 x 53.55 in. 91 x 35 x 136 cm
Maximum Load US Standard Metric
- Shelving unit 400 lbs 181 kg
- One single shelf 100 lbs 45 kg
Cleaning and Maintenance
- Wipe with a damp cloth as needed to remove dust and dirt.
For More Manuals by Amazon, Visit LatestManuals
FAQs About Amazon Basics 4-Shelf Adjustable, Heavy-Duty Storage Shelving Unit
Is each shelf’s capacity?
The stated load capacity of any shelving or mini-racking unit corresponds to the load capacity of each shelf (or level). It’s crucial to take into account the maximum total capacity of your shelving or mini-racking device in addition to the load capacity of each level.
When putting heavy objects on shelves, what is the safest level to do so?
On heavy-duty storage shelves, always place heavier loads on the lowest or middle levels. To reduce the possibility of tipping, store long, heavy things on their side. To help with material location and speed up the process, label all heavy storage items.
Why is it that heavy items work best on the lower shelves of a shelving system?
Lower Shelves Should Hold Heavy Loads This method not only keeps employees safe from any falling objects, but also guarantees the shelves’ structural integrity. Top shelves that are overloaded may put too much strain on the system as a whole and buckle or collapse.
Why are heavier goods supposed to be kept on lower shelves?
The center or lower levels of storage shelves should hold your heavier objects because placing them higher could pose a safety risk. Additionally, make an effort to maintain a uniform distribution of weight on floating or storage shelves.
What weight can a shelf support?
The quantity of wall studs you utilize to support floating shelves will determine their shelf load capability. One wall stud may typically support up to 50 pounds. Accordingly, a three-foot shelf supported by two wall studs can support up to 100 pounds on the entire shelf.
In what manner is it preferable to hang a heavy shelf?
An electronic stud finder can be used to locate studs behind walls, or you can just tap the wall lightly with your knuckles and listen for sturdy support. Mounting shelves into studs will maximize their holding ability if your shelves are heavy or if you intend to use them to support a heavy object.
How can shelf storage be optimized?
Ensure that every aisle covers two sides of the shelves. To maximize aisle space, always arrange shelves back to back. Figures 1 and 2 show how the storage area in this tiny space increased from 41 to 61 meters when the warehouse shelving was positioned back to back.
Does shelving require fastening?
If a building has high shelving units, they ought to be anchored to the wall, the floor, and each other if at all feasible. The height-to-depth ratio of the tier stacking must be 6:1 or less. When shelving is secured with insufficient depth, it might lead to an imbalance, which makes loading and unloading hazardous.
What is the best way to arrange loads on shelves for storage?
Heavy goods should be kept at waist height if they must be frequently moved in and out of storage. When an employee must reach above head height to access shelving, heavy loads should never be placed there.
On shelves, where should bulky objects be kept?
Place bulky things on the lower or intermediate levels: Heavy Stuff should not be kept on high shelves or racks since this increases the possibility of it toppling over.
How much weight is supported by adjustable shelves?
The ever-popular adjustable shelves come with their own set of guidelines. Plastic clips can only support 10 pounds, whereas each metal clip can support approximately 25 pounds. It’s also crucial to examine the screws’ quality.
How can thick shelves be hung without drilling?
When installing shelves, adhesive mounting strips work just as well as nails.
Is it possible to put shelves on plasterboard?
Installing heavy-duty shelving brackets on wall studs is the best way to use them on plasterboard. Invest in a stud finder if you don’t already have one to determine where the strongest portions of the wall rest.
Are shelves that float a good idea?
A space’s appearance can be enhanced by floating shelves. They don’t have to take up all of the available space. The best approach to organize a kitchen is to use closed cabinets and floating shelves to put away anything you don’t want on exhibit and display only the items you want on display.
What is the ideal length for floating shelves?
10″-11″ book shelves – The wooden shelves are ideal for use as floating book shelves! Dishwasher: 11″ – The majority of dishes will fit on an 11″ deep shelf. But measure beforehand if you’re unsure! Pots and pans and large dinnerware: 12″.
