ALHAFIDH 32LG3 32 Inch LED TV User Manual

ALHAFIDH-32LG3-32-Inch-LED-TV-featured

ALHAFIDH-logo

ALHAFIDH 32LG3 32 Inch LED TV

ALHAFIDH-32LG3-32-Inch-LED-TV-product

About ALHAFIDH

In addition to being the primary distributor of Samsung signage and Hisense HVAC in Iraq, Alhafidh Group is a Leading Group of Companies with a focus on consumer electronics.

It also distributes Panasonic, Midea, Electrolux Home Entertainment, and Home Appliances.

Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications are subject to change for improvement without prior notice.

IMPORTANT SAFETY INSTRUCTIONS

This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

WARNING

  1. To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
  2. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
  3. Do not install this equipment in a confined or building-in space such as a bookcase or similar unit, and maintain a good ventilation condition at the open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
  4. Please refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.
  5. The mains plug/appliance couple is used as a disconnect device, the disconnect device shall remain readily operable.
  6. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
  7. The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire, or the like.
  8. Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
    • Using cabinets or stands recommended by the manufacturer of the television set.
    • Only use furniture that can safely support the television set.
    • Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and television set to a suitable support.
    • Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
    • Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and located, the same considerations are above should be applied.
  9. No naked flame sources, such as lighted candles, should be placed on the apparatus.
  10. Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.

INTRODUCTION

Precautions

Read all of the instructions before operating the set. Keep these instructions well for future use.

Product

  • Do not block or cover the ventilation openings on the back cover.
  • Do not push objects of any kind into this unit through the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit.
  • Do not attempt to open the cabinet as this may cause damage. There are no parts inside you can service by yourself. Refer all servicing to qualified personnel.
  • Do not touch the screen surface with your fingers as this may scratch or mar the IV screen.
  • Do not impact the TV screen with hard pressure as this may damage the TV screen severely.

Use Environment

  • Do not place the set on an unstable cart, stand, or table.
  • Place the set in a place that allows good ventilation.
  • Do not use the set near damp, and cold areas. Protect the set from overheating.
  • Keep the set away from direct sunlight.
  • The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Do not use the set near the dust place.

Power and Plug

  • Unplug the set under the following conditions:
    • If the set will not be used for a long period.
    • If the power cord or the power outlet/plug is damaged.
    • Follow the instructions to install and adjust the product. Adjust those controls that are covered in these operating instructions as improper adjustment of other controls may result in damage. If this happens, unplug the set and refer to the service personnel.
    • If the set is subject to impact or has been dropped to have the cabinet damaged.

Power Cord and Signal Cable

  • Do not allow anything to rest on or roll over the power cord and the signal cable.
  • Protect the power cord and the signal cable from being trampled.
  • Do not overload the power cord or the power outlet.
  • Do not expose the power cord and the signal cable to moisture.

Hanging the TV Set on the Wall

Warning: This operation requires two people.
To ensure a safe installation, observe the following safety notes:

  • Check that the wall can support the weight of the TV set and wall mount assembly.
  • Follow the mounting instructions provided with the wall mount.
  • The TV set must be installed on a vertical wall.
  • Make sure to use only screws suitable for the material of the wall.
  • Make sure that the TV set cables are placed so that there is no danger of tripping over them.

All other safety instructions about our TV sets are also applicable here.

Note:

Illustrations within this publication are provided for reference only.

General Operation

Network Connection

To access the internet, you must subscribe to high-speed broadband internet service from your internet service provider. Your TV can be connected to your home network in two ways:

  • Wired, using the RJ45 (LAN) connector on the back panel.
  • Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.

Note: This function is not available for certain models. Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection method may be different depending on your actual network configuration. If you have any questions about your home network, please refer to your ISP (Internet Service Provider).

Connecting to a wired network

ALHAFIDH-32LG3-32-Inch-LED-TV-fig-1

To connect to a wired network:

  1. Ensure you have:
    • An ethernet cable long enough to reach your TV
    • A router or modem with an available Ethernet port
    • A high-speed internet connection
    • An Ethernet (LAN) port on the back of the TV
  2. Connect your ethernet cable to the router and the Ethernet port on the back of the TV.
  3. Use the Network Settings to configure the TV.

Connecting to a wireless network

ALHAFIDH-32LG3-32-Inch-LED-TV-fig-2

To connect to a wireless network

  1. Ensure you have.
    • A router broadcasting a high-speed wireless signal
    • A high-speed internet connection
    • A wireless USB Adapter (no need for a built-in wireless connection).
  2. The TV set with Wi-Fi Module.
  3. Use the Network menu to configure the TV.

Note: Some models may have an internal wireless module, then the wireless USB adapter is unnecessary. Some external wireless adapters cannot be compatible with the TV.

Other Information

Troubleshooting

Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.

No picture, no sound

  1. Check if the fuse or circuit breaker is working.
  2. Plug another electrical device into the outlet to make sure it is working or turned on.
  3. The power plug is in bad contact with the outlet.
  4. Check the signal source.

No color

  1. Change the color system.
  2. Adjust the saturation.
  3. Try another channel. The black-white program may be received.

The remote control does not work

  1. Change the batteries.
  2. Batteries are not installed correctly.
  3. The main power is not connected.

No picture, normal sound

  1. Adjust the brightness and contrast.
  2. Broadcasting failure may happen.

Normal picture, no sound

  1. Press the Vol+ button to increase volume.
  2. Volume is set to mute, press the mute button to restore sound.
  3. Change the sound system.
  4. Broadcasting failure may happen.

Unorderly ripples on the picture

It is usually caused by local interference, such as cars, daylight lamps, and hair driers. Adjust the antenna to minimize the interference.

Blank screen in VGA mode

Perhaps the TV can not recognize the resolution set by the PC. Suggest to change to the best resolution or other standard resolutions of the Windows system.

Snowy dots and interference

If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the reception.

  1. Adjust the position and orientation of the indoor/outdoor antenna.
  2. Check the connection of the antenna.
  3. Fine-tune the channel.
  4. Try another channel. Broadcasting failure may happen.

Ignition

Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from car ignition systems, neon lamps, electric drills, or other electrical appliances.

Ghost

Ghosts are caused by the television signal following two paths. One is the direct path, and the other is reflected from tall buildings, hills, or other objects. Changing the direction or position of the antenna may improve the reception.

Radio frequency interference

This interference produces moving ripples or diagonal streaks, and in some cases, loss of contrast in the picture. Find out and remove the radio interference source.

If the TV is crashed

  1. Press the Power button to turn off the TV, then press the Power button again to reset the TV.
  2. Unplug the power cord, then press the Power button to reset the TV.

Note: If these 2 methods can not be resolved, please contact the after-sales to solve.

Base Installation

To fix the double support base on the unit by screws, the installation is completed.
Note: Illustrations below are provided for reference only and may differ from actual product appearance.ALHAFIDH-32LG3-32-Inch-LED-TV-fig-3

Notes for battery disposal

The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.

For more information, please contact the local authority or the retailer where you purchased the product. All trademarks are the property of their respective owners and all rights are acknowledged.

This equipment is a Class I or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

To prevent the spread of fire, keep candles or other open flames away from this product at all times. Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the country.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright 1992-2021 DolbyLaboratories. All rights reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. www.alhafidh.com

For More Manuals by Alhafidh, Visit LatestManuals

Faqs About ALHAFIDH 32LG3 32 Inch LED TV

How much power does a 32-inch LED TV use per hour?

For instance, a 32″ OLED TV uses 55–60 watts of power, while a 32″ LED TV uses between 30-55 watts. The 32-inch LCD TV uses more power—between 50 and 85 watts. With an average of 170 watts, the older 32″ CRT TVs consume the most power, ranging from 150 to 200 watts.

How big is a 32-inch smart TV?

32″ TVs typically measure 28.7 x 19 inches. Depth varies, usually 7.5 inches, depending on how thin they are.

How much voltage is required for an LED TV 32 inch?

The voltage range for a 32-inch Samsung LED TV is 100–240 V.

Does a 32-inch LED TV need a stabilizer?

Indeed, many contemporary LED TVs come equipped with built-in stabilization features. However, you will need to buy a separate stabilizer if your TV does not include this feature. I hope that this response may assist you in selecting an LED TV stabilizer.

Can we use a TV without a stabilizer?

If there are frequent variations in the voltage in your home, you also need a voltage stabilizer. Variations in voltage can damage your devices by sending different amounts of electricity to the same equipment. Voltage fluctuations at your electric socket can be prevented with the use of a TV voltage stabilizer.

How many amps is a 32-inch LED TV?

Thus, it might be as small as 1/3 amp at 36 watts for a typical 110-volt home outlet (the wattage of a common Best Buy 32-inch model.) The identical TV would draw three amps at 12 volts. Some of these TVs can be powered directly out of the box using a regular DC barrel connector and a 12-volt socket.

How long does a 32-inch TV last?

After constant use, most TVs typically survive between seven and ten years. A TV can easily endure up to 100,000 cumulative hours of operation, even at its brightest setting.

How do I resize my TV?

Thus, it might be as small as 1/3 amp at 36 watts for a typical 110-volt home outlet (the wattage of a common Best Buy 32-inch model.) The identical TV would draw three amps at 12 volts. Some of these TVs can be powered directly out of the box using a regular DC barrel connector and a 12-volt socket.

Is a 32-inch TV sufficient?

After constant use, most TVs typically survive between seven and ten years. A TV can easily endure up to 100,000 cumulative hours of operation, even at its brightest setting.

Can you use an AC stabilizer for the TV?

Can we watch TV with an AC stabilizer? It is possible to utilize a voltage stabilizer with a TV. Stabilizers are not needed for TVs, though. TVs have a broad operating voltage range, and our supply voltage typically stays above or below the maximum and lowest thresholds.

Leave a Reply