ADLER AD 7815 Oil Radiator User Manual

ADLER AD-7815-Oil-Radiator-featured

ADLER-logo

ADLER AD 7815 Oil Radiator

ADLER AD-7815-Oil-Radiator-product

SAFETY INSTRUCTION

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.

  1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
  2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
  3. The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
  4. Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
  5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory, or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
  6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
  7. Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
  8. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced to avoid hazardous situations.
  9. Never use the product with a damaged power cable if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
  10. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
  11. Never use the product close to combustibles.
  12. Do not let the cord hang over the edge of a counter or touch hot surfaces.
  13. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
  14. Never use this device close to water, e.g.: Under the shower, in the bathtub, or above a sink filled with water.
  15. The heater should be placed on a level, heat-resistant surface, away (at least one meter) from flammable materials (lace curtains, curtains, wallpaper, furniture, etc.).
  16. The power cable should not be placed above the heater, and also should not touch or lie close to hot surfaces. Do not place the heater under an electrical outlet.
  17. The surface of the heater can heat up to high temperatures of over 60 degrees C. Take care when near the heater.
  18. Do not cover the heater with curtains, or a towel or hang washing on it – this can damage the heater or cause a fire.
  19. When using the heater, completely unwind its cable and make sure that the cable is not touching the hot surface of the heater.
  20. Do not use the heater near basins, showers, sinks, pools, or other places where it can get wet.
  21. The device must be completely cool before storage. Keep the original packaging to store the heater in during non-heating seasons.
  22. The heater is filled with a set amount of special oil. Repairs requiring the opening of the oil container must be carried out only by the manufacturer or authorized representative, who should be contacted if oil leaks from the heater.
  23. If disposing of the heater please follow the rules of oil disposal.
    WARNING: To avoid overheating do not cover the heater.
  24. Do not use this heater near a bathtub, shower, or swimming pool
  25. Do not use this heater if it has been dropped
  26. Do not use it if there are visible signs of damage to the heater
  27. Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer

DESCRIPTION OF THE DEVICE

ADLER AD-7815-Oil-Radiator-fig-1

  1. Diode indicating operation of the device
  2. Thermostat control knob
  3. Power level control knob 0/I/II/III
  4. Cable storage
  5. Wheels
  6. Ribs

ASSEMBLY

ADLER AD-7815-Oil-Radiator-fig-2

  1. Turn the heater upside down.
  2. Place the wheelbases between the last ribs.
  3. Use the U-shaped clamp to hook the bases.
  4. Block the clamp by screwing on the butterfly nut.
  5. Place the heater on the wheels

CAUTION: After turning the heater, wait at least one hour before connecting it to a power outlet.

USING THE DEVICE

During the first use of the heater, a small amount of smoke may appear. This is normal.

  1. Place the oil heater a minimum of 100 cm from walls, furniture, curtains, plants, etc.
  2. Make sure that the on-switch control knob (3) and thermostat control knob (2) are set to ‘0’. Connect the oil heater to mains power.
  3. Turn the heater on by turning the on-switch control knob (3) to position I (low heating power) or II (middle heating power) or III (high heating power). Set a comfortable oil heater temperature by turning the thermostat control knob.
  4. After you finish using the heater, turn it off by turning the on-switch control knob and thermostat control knob to ‘0’ and disconnect the power cable from the mains power.

CLEANING THE DEVICE

  1. Before cleaning always remove the plug from the electrical outlet.
  2. Before cleaning allow the heater to cool. Make sure that it is cool.
  3. Wipe the heater with a damp cloth, then wipe dry.
  4. Never use wax, shining agents, or chemical agents to clean the heater. They may react with the device and cause discoloration or even damage.

TECHNICAL DATA

  • Power source: 220-240 V~50/60 Hz

Power:

  • AD7815 – 1: 600 W 2: 900 W 3: 1500W
  • AD7816 – 1: 800 W 2: 1200 W 3: 2000W
  • AD7817 – 1: 1000 W 2: 1500 W 3: 2500W
  • AD7818 – 1: 1000 W 2: 1500 W 3: 2500W
  • AD7819 – 1: 1000 W 2: 1500 W 3: 2500W

Disposal

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment.

Electrical appliances must be returned to reduce their reuse and utilization. If the device contains batteries they should be delivered to dedicated points separately.

For More Manuals by ADLER, Visit LatestManuals

Leave a Reply