Acoustics Research AWSBT4 Portable Wireless Speaker
About Acoustics Research
AR’s Wireless Speaker System eliminates the hardest part of adding speakers to your home—running and hiding hundreds of feet of speaker wire. The AR Wireless Speaker System’s RF signal travels with ease through walls, floors, ceilings, and other obstacles, delivering high-quality sound virtually anywhere inside the house or out.
With drift- and static-free reception along with outstanding range—up to 150 feet*—the possibilities for enjoying your AR Wireless Speaker System are nearly unlimited.
The AR Wireless Speaker System is compatible with most audio sources, such as TVs, DVD players, VCRs, A/V receivers/amps, stereos, computers, and portable devices (CD players, cassette players, MP3s, etc.).
This manual covers various connection options and detailed operating instructions for making the AR Wireless Speaker System a valued part of your lifestyle. If, after having reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or visit www.araccessories.com.
INFORMATION
The portable wireless speaker makes it easy to take your music wherever you go and share it whenever you want, with Bluetooth® wireless connectivity and a built-in auxiliary input. It’s compact, easy to carry, and simple to use.
This manual covers various connection options and detailed operating instructions for making the customizable portable wireless speaker a part of your lifestyle. If, after having reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or visit arspeakers.com.
Important Information
Caution: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service. personnel.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install by the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience re cep ta cles, and the point where they exit from the apparatus.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the ap pa ra tus has been exposed to rain or moisture, not operate normally, or has been dropped.
Tour of the Speaker
Back panel
- The power and Pairing indicator shows the status of the speaker.
- Blue, slow blinking: The speaker is on but not paired or connected.
- Blue, fast blinking: The speaker is in Bluetooth pairing mode. See the Bluetooth Setup section for more information.
- Solid blue: The speaker is paired with a Bluetooth-enabled device or the auxiliary audio input is connected.
- The ON/OFF button turns the speaker on and off.
- – VOLUME + buttons adjust the speaker’s volume level.
- AUX IN connects directly to your MP3 player, smartphone, or other portable audio device, using the 3.5mm audio in cable provided.
- DC IN receives the small round end of the included 12V DC 1000mA AC power adapter; remove the protective cover to insert the adapter.
Bottom panel
- Battery Compartment Cover removed to install 8 AA batteries.
Powering the Speaker System
Powering the Speaker
There are two options to power your wireless speaker: using the included AC power adapter or using 8 AA batteries (not included).
AC Power Adapter
- Insert the small, round plug from the speaker AC power adapter into the DC IN jack on the bottom panel of the speaker.
- Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet.
AA Batteries
- Remove the battery compartment cover on the bottom of the speaker.
- Insert eight (8) AA batteries (not included) into the speaker following the polarity (”+” and “-”) as diagrammed inside the battery compartment.
- Replace the battery compartment cover on the bottom of the speaker.
Setting Up Bluetooth Wireless
Pairing
The Bluetooth-enabled device that you wish to stream audio to your speaker system must first be paired to the speaker. The process is simple, and in most cases, the pairing process needs to be done only once. To pair your Bluetooth-enabled device with the speaker:
- Make sure your device’s Bluetooth is turned on. See the wireless and/or network settings menu on your device to check.
- If the speaker isn’t already on, press the ON/OFF button to turn it on. You will hear the turn-on music to indicate the speaker is turned on. The indicator light at the back of the speaker starts flashing blue.
- Open the Bluetooth settings menu on your device. Select “AR AWSBT4” from the list of devices available (you might have to scan for devices). If your device asks for a password, enter “0000”.
- A confirmation screen will appear on your device once the speaker and the device are successfully paired. The blue indicator turns solid blue to indicate a successful connection. The speaker is now ready for you to stream audio from your device.
- Turn the volume on your device to at least 3/4 max, then start playing something on the device. Control the speaker volume on the speaker itself, using the Volume +/– buttons at the back of the speaker.
Reconnecting
When you turn it on, the speaker reconnects automatically with the last paired device. When you leave the Bluetooth operating range, with the speaker turned ON, it disconnects. When you come back into the Bluetooth operating range, press the Pair button to reconnect to the last paired device. The successfully paired music will sound once it has been successfully connected.
Setting Up Bluetooth Wireless
Streaming Audio With Bluetooth
Once you’ve paired and connected your device with the speaker, you can control music playback from the palm of your hand. Select your music, stop it, and change songs and playlists, all right from your device’s screen.
Using the Auxiliary Audio Input
Making a Direct Connection
- If the speaker isn’t already on, press the ON/OFF button to turn it on.
- Connect one end of the provided 3.5mm audio-in cable to the AUX IN jack on the back of the speaker.
- Connect the other end of the cable to the headphone output on your MP3 player or other portable audio device.
Warning: This product is designed to work with line-level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the speaker.
Turning the Speaker Off
- Press the ON/OFF button at the back of the speaker to turn the speaker off.
- Confirm that the speaker is off by verifying that the indicator light at the back of the speaker is no longer illuminated.
Troubleshooting
The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free at 1-800-732-6866 or visit arspeakers.com.
Specifications
Speaker
- Bluetooth® wireless technology: Bluetooth v4.0
- Profi le: A2DP audio sink, AVRCP
- Class 2 Radio
- 2-way acoustic design:
- 3” Driver, 1.5” tweeter
- Passive Radiator: 4” round
- Audio line-in
- Operation distance: Up to 33 Feet (open area)*
- Frequency response: 20Hz – 20kHz
- Operates using supplied AC adapter or eight (8) AA batteries (not included)
Maximum range; results may vary according to environment.
Care and Maintenance
- Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface.
- Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock.
- If the speakers are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage.
- Do not operate or store the system in extreme temperatures (below 32oF/0oC and above 122oF/50oC).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it.
12-Month Limited Warranty
VOXX Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of the defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer.
This Warranty is not transferable and does not cover products purchased, serviced, or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static or noise, tor o costs incurred for the installation, removal, or reinstallation of the product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state/ province to state/province.
U.S.A.:Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 14, Mississauga Ontario L5T 3A5
Trademark(s) ® Registered arspeakers.com MADE IN CHINA AWSBT4/BK US IB 00
FAQs About Acoustics Research AWSBT4 Portable Wireless Speake
What is the lifespan of a portable Bluetooth speaker?
Although portable Bluetooth speakers are made to endure some wear and tear, how well they function ultimately determines how long they survive. They can survive for at least five years if they are kept in perfect condition.
Are Bluetooth speakers energy-hungry devices?
Trying it is the only surefire way to find out. But according to my maths, this: Bluetooth radios require approximately 120mw, or 35–40m of electricity, to transmit or receive. There are rumors that the newest iPhone has a three-watt speaker. In my experience, the worst-case efficiency of audio amplifiers is about 50%.
Is it necessary to break in portable speakers?
Nonetheless, breaking in a speaker needs to be your primary priority. The following are some justifications for thinking about breaking in your speaker: It might aid in raising sound quality. Before speakers perform to their best, they must be broken in, much like any other piece of audio equipment.
How many Bluetooth-enabled gadgets are there?
Laptops and smartphones with Bluetooth support many connections at once. When a primary device is in active mode, the most recent version of the Bluetooth 5 protocol permits up to seven simultaneous device connections. There could be conflicts if many Bluetooth accessories use the same Bluetooth profile or capability.
Are Wi-Fi-enabled speakers wireless?
Selecting a wireless speaker that connects to your gadgets via Bluetooth or Wi-Fi should be your first step when searching for a new one. It sounds insignificant. However, a pair of speakers’ operation determines its toughness and clever feature set in addition to their sound quality, portability, and range.
Do wireless speakers need to be connected to the Internet?
Since Wi-Fi speakers are directly connected to a home network and do not have to undergo the same compression process as Bluetooth speakers, they provide higher-quality sound. However, because Bluetooth speakers don’t require an internet connection, they are more portable.
Do wireless speakers require electricity to operate?
Yes, power is all that wireless speakers like Soundcast, HEOS, Sonos, and others require. The speaker and the other devices you’re attempting to stream music from must be compatible. The majority of wireless speakers come with a tonne of streaming choices when used as a single speaker.
What is the wattage required for a portable speaker?
The majority of Bluetooth speakers will have wattages between 15 and 30 watts, according to a source. According to another source, the optimal range for a speaker’s wattage for household use is between 15 and 30 watts. It’s a good idea to budget roughly 20 watts per square foot of space.
Do wireless speakers require electricity to operate?
Yes, power is all that wireless speakers like Soundcast, HEOS, Sonos, and others require. The speaker and the other devices you’re attempting to stream music from must be compatible. The majority of wireless speakers come with a tonne of streaming choices when used as a single speaker.
What is the wattage required for a portable speaker?
The majority of Bluetooth speakers will have wattages between 15 and 30 watts, according to a source. According to another source, the optimal range for a speaker’s wattage for household use is between 15 and 30 watts. It’s a good idea to budget roughly 20 watts per square foot of space.
In what way do speakers require power?
A lot relies on how well you listen and how skilled the speaker is. If your speakers are 90dB efficient and you enjoy listening to loud, uncompressed music, 200 Watts should be more than enough power for you. 50 Watts is plenty if all you listen to is jazz and light classical music and you don’t need them to blow you away.
What factors affect a portable speaker’s loudness?
The unit of measurement for loudness is decibels, or “dB.” You can get an idea of how loud a speaker can reach by looking at its decibel rating. The output levels of Bluetooth speakers vary based on their build and brand.
For More Manuals by Acoustics Research, Visit LatestManuals
- Acoustics Research AWSBT7 Portable Wireless Speaker Installation Manual
- Acoustics Research AW772 Portable Wireless Headphones User Manual
- Acoustics Research AW722 Portable Wireless Headphones User Manual
- Acoustics Research AWSBT4BK Portable Wireless Speaker Operation Manual
- Acoustics Research UA1 USB DAC with headphone amplifier User Guide
|
Acoustics Research AWSBT4 Portable Wireless Speaker Installation Manual [pdf] |
