Abestorm DecDust 500 Stage Air Filtration System User Manual

Abestorm DecDust 500 Stage Air Filtration System

About Abestorm

Abestorm Crawl Space NeatyFresh Max allows for the free circulation of air on the porch and under the house. High moisture levels in the crawl spaces can lead to the decay and rot of wooden pillars that support the house, floor, joists, and beam pillars. Also, high humidity causes an increase in termite activity and the growth of fungi. Rust, which causes corrosion and leaks in metallic pipes, is also factored into the moisture level in your crawl space.

With our ventilation fan, radon gas from treated wood is expelled away. This gas and other odors can easily spread into the living room and cause discomfort. The NeatyFresh Max fan uses a humidity switch to control the fan to commence operation. The fan starts operating when the recorded humidity surpasses the selected value.

WARNING

Please note that the dust collector can only be used with Abestorm-approved accessories. Using unauthorized accessories or making changes to the machine may invalidate your warranty. Please contact us for more details.

To Avoid Accidents:

• The power cord of the machine must be plugged into a grounded socket.
• The power supply of the machine must not be higher than the specified power supply.
• The machine should not be installed outdoors or in places that may be eroded by Rain Water to avoid damaging the electrical components and Fire.
• Do not run the machine without a filter installed.
• The machine has to be disconnected from power before it can operate internally.
• If hooks are installed on the ceiling, the load-bearing capacity of the ceiling must be greater than 110 lbs.
• If the dust collector is to be installed on the ceiling, the distance between the bottom of the dust collector and the ground must be greater than 7 ft.
• Installation requires two people.

HOW IT WORKS

1. Connect the dust collector to a standard 115V/60Hz outlet.
2. Refrain from moving the unit during operation.
3. Keep both air inlet and outlet away from the wall or any obstructions for at least 2 ft
4. This product can only filter dust particles above 1um.

KEY FEATURES

INSTRUCTIONS

CONTROL PANEL

REMOTE CONTROL

1. 1. Power key:
   Turn on and off air filtration equipment Click the control panel “ON/OFF” /remote control”ON/OFF”. The machine will make a “drip” sound, the environment prompt light will be on, and the display screen will display the PM number of the environment.
2. Wind speed key:
   Control the wind speed of Low, Middle, and High. Each time it is operated, the light of the control panel will switch to one of the wind speed gears, and the light represents the wind speed of the current gear.
3. Timing Button:
   On/Off (Power) function
4. ionizer switch button:
   Description: This button is only used on the remote control, which is a general accessory. The low-end version does not have this feature, so you need to pay attention to the version model when you buy it. Operate the “IONIZER” button of the remote control, the ionizer switch light on the control panel is on, the ion function starts, and operates again, the ionizer switch light is off and the ion is off.
5. Up / Down Button:
   Adjust the running time, increase by one hour each time the up button is pressed, and decrease by one hour each time the down button is pressed (the maximum time is increased to 12 hours, and the minimum time is reduced to hours.

HOW TO INSTALL DUST COLLECTOR

Installation mode 1

1. Fix the hook as shown in the picture to 4 holes at the top of the machine with an M4 nut. The M4 nut needs to be tightened to prevent the hook from rotating and falling off.
2. Fasten the horn hook to the ceiling.
3. Two people are required for this installation. One(1) person to pick up the dust collector and the other to connect the end of the chain to the machine hook.
4. Due to the impact of the machine itself and the environment, there will be installation imbalance, the number of sections of the chain hook can be used to adjust the machine balance.

Installation mode 2

1. Remove the four M4 screws from the top of the machine, install the pendant as shown in the picture, and fix the M4 screws just now.
2. One man picked up the dust collector and the other screwed the machine to the wall.

HOW TO REPLACE THE FILTER

1. Turn off the machine before replacement.
2. Loosen the buckles on the side of the machine.
3. Remove the filter.
4. Install a new filter.
5. Pay attention to the sequence of filters.

SPECIFICATION

MAINTENANCE AND CLEANING

Under poor air quality, there will be a lot of dust in front of the control panel, which needs to be cleaned up.

INSPECTION AND TROUBLESHOOTING

1. The display shows “000”, the motor stops working, and the PM2.5 indicator light shows red, which means a problem with the PM sensor. Maintenanceandcleaningarerequired.
2. If the machine is short-circuited and there is a power outage at home, the overload protector will cut off the circuit to protect the machine.

POWER-OFF PROTECTION TREATMENT

1. Unplug the machine.
2. Press the overload protector button back to its original position by hand.
3. Plug in the power supply and start up.

LIMITED WARRANTY

The limited warranty applies to the original purchaser only, from the date of purchase. It should be subject to the terms and conditions listed in this limited warranty file-

WARRANTY PERIOD

The warranty becomes effective from the date of the original purchase and will last for one year. This limited warranty is not transferable. It is only valid for the original purchaser.

Warranty debarment:

1. Damage caused by the owner when attempting to fix or alter the product by himself or herself.
2. Damage caused by misuse, abuse, neglect, alterations, or unauthorized repair.
3. Natural depreciation.

Abestorm Warranty Steps:

1. Upon receiving this item, visit www.abestorm.com and fill out the warranty registration form. The order number is required to submit a warranty claim.
2. To request warranty service, contact sales@abestorm.com.
3. After receiving the warranty service request, our customer support team will investigate the issue. Here, will be determined if a Return authorization is necessary.
4. If the damage to the machine is proven to be one of the warranty exclusions (Page 10), Abestorm will not be responsible for all the associated repair and shipping costs. The eligibility of a replacement unit will also be voided.
5. If the damaged unit that can no longer be fixed is within the warranty period, Abestorm will handle all the costs of sending a brand-new replacement unit.
6. When the unit is repaired or replaced, the original warranty period carries over to the repaired or new unit. No warranty extensions will be offered.

Warranty Exclusions:

DAMAGE DUE TO THE FOLLOWING IS NOT covered under warranty

1. Acts of Nature- including but not limited to:
   • Flooding
   • Fire
   • Water damage
     Hurricane/storm damage
2. IMPROPER USAGE- Including but not limited to:
   • Misuse, abuse, or tampering whether intentional or accidental
   • Improper installation or design
   • Improper voltage
   • Improper maintenance
   • Failure to follow instructions
3. Corrosion
4. Freezing
5. Any additional costs due to changes in laws or building codes
6. Freight charges
7. Any costs due to lost profit or delay
8. Damage to property
9. Cause beyond control
10. Consumable parts, including but not limited to:
    • Filters
    • Batteries
    • Power cords
    • Valves
    • Switches
    • Rubber parts
11. Direct, indirect, collateral, or inconsequential damages of any kind

THE WARRANTIES AND LIABILITIES SET FORTH ARE INSTEAD OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, IN LAW OR FACT, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Abestorm total liability, regardless of the nature of the claim shall not exceed the original purchase price of the product. If a product or component is replaced while under warranty, the applicable warranty period shall not be extended beyond the original warranty period. The foregoing shall constitute the total liability of the seller in the case of defective performance of all or any of the equipment or services provided to the Buyer.

Buyer agrees to accept and hereby accepts the foregoing as the sole and exclusive remedy for any breach or alleged breach of warranty by Seller. Any dishonesty or fraud in connection with the Abestorm warranty thoroughly voids all warranty policies.

Abestorm expressly reserves the right to pursue legal action in the event of dishonesty, fraud, or attempted fraud.

IMPORTANT NOTICE: Keep the item’s packaging in case warranty service is required.

Wiring Diagram

How to request warranty services?

To obtain the benefit of this warranty, please leave your message online (www.abestorm.com), or send
an email to sales@abestorm.com.
Our customer service will address your issue between Mon-Fri 7.00 AM to 4•00 PM PST

FAQs About Abestorm DecDust 500 Stage Air Filtration System

For More Manuals by Abestorm, visit LatestManuals