AD 2113 Adler Fan Brush User Manual

AD 2113 Adler Fan Brush-featured

ADLER-logo

AD 2113 Adler Fan Brush

AD 2113 Adler Fan Brush-product

SAFETY INSTRUCTION

SAFETY CONDITIONS IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.

  1. when using the product please read carefully and always observe the following instructions. The manufacturer is not responsible for any damages due to misuse.
    The product is only for indoor use. Do not use the product for any use that is not compatible with its application.
  2.  The applicable voltage is 220-240 V~50/60Hz. For safety reasons, it is not suitable to connect several devices to one electrical outlet.
  3. Please be careful when using it around children. Do not let children play with the product. Do not let children or people who are unfamiliar with the device use it without supervision.
  4. WARNING: This device can be used by children over 8 years of age and persons with reduced physical, sensory, or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they have been instructed about the safe use of the device and is aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device must not be carried out by children unless they are over 8 years old and these activities are carried out under supervision.
  5. After you have finished using the product, always remember to gently remove the plug from the electrical outlet holding the outlet with your hand. Never pull the power cable !!!
  6. Never put the power cable, the plug, or the whole device in the water.
  7. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
  8. Periodically check the condition of the power cable. If the power cable is damaged the product should be turned to a professional service place to be replaced to avoid
    dangerous situations.
  9. Never use the product with a damaged power cord if it has been dropped or otherwise damaged or if it is not working properly. Do not attempt to repair the damaged product yourself, as it may lead to electric shock. Always return the damaged device to a professional service location for repair. All repairs may only be performed by authorized service professionals. The repair performed incorrectly can cause dangerous situations for the user.
  10.  Never place the product on or near the hot or hot surfaces or the kitchen appliances such as the electric oven or gas burner.
  11. Never use the product near fuels.
  12. Do not let the cord hang over the edge of a counter or touch hot surfaces.
  13. Never leave the product connected to the power source unattended. Even when
    usage is interrupted for a short time, disconnect it from the network, and turn off the power.
  14. To provide additional protection, it is recommended to install a residual current device (RCD) in the power circuit, with a residual current rating of no more than 30 mA. Contact a professional electrician about this matter.
  15. Warrior IconNever use this device near water, eg: Under a shower, in a bathtub, or over a sink filled with water.
  16. If you use the device in the bathroom after use, remove the electrical plug from the socket, as the proximity of water poses a risk, even if the device is switched off.
  17. Do not let the device or power adapter get wet. If the device falls into water, immediately remove the power plug or power adapter from the socket. If the device is in operation, do not put your hands in the water. Have the device checked by a qualified electrician before using it again.
  18. Do not touch the device or power adapter with wet hands.
  19. The device must be switched off after each use.
  20. Do not leave the device on the wall or electrical unit unattended.
  21. If the device uses a power adapter, do not cover it, as this may cause a dangerous temperature rise and may damage the device. Always connect the power adapter to the device, and then connect the power adapter to the power socket.
  22. Keep the device out of the reach of children. The use of the device by children must be supervised by adults.
  23. The power cord must not touch hot parts of the device and must not be located near other heat sources.
  24. Do not wrap an electrical cable around the device.
  25. Do not use a hair curling iron in the bath.
  26. Do not remove dust or foreign bodies from inside the hair straightener using sharp objects.
  27. Do not use outdoors where aerosols are used or where oxygen is administered.
  28. Do not cover the hair curl with an iron, it could cause the accumulation of heat inside it and it can cause damage or fire.
  29. Hair sprays contain flammable materials. Do not apply them while using the device.
  30. Do not use the device on people who are sleeping.
  31. The device can only be supplied with the voltage specified on the housing.
  32. During operation, do not place the device on wet surfaces or clothing.
  33. After use, turn off and turn off the device. Wait until the device cools down before storing it.
  34. During the operation ceramic plates heat up to high temperatures. Do not touch hot parts of the hair curling iron and do not allow contact with the skin of the head, as it may cause burns
  35. The device is not designed to work with external planners or a separate remote control system.

DEVICE DESCRIPTION

AD 2113 Adler Fan Brush-fig-1

  1. Cool tip
  2. Ceramic rod with plastic bristles
  3. Clip
  4. Lever
  5. stand up
  6. On/off switch
  7. Control lights
  8. Swivel cord

INSTRUCTIONS FOR USE

  1. Connect the unit to the power. Place the device on the stand (5) in a safe position.
  2. Turn on the device by pressing the on/off button for 3 seconds. (6)
  3. The LED control lights will begin to blink.
  4. Select desired temperature: 140°C, 160°C, 180°C, 200°C, pressing switch (6) for 2 seconds.

CURLING FUNCTION

  1. Start by parting a strand of hair.
  2. Open the clip
  3. using the lever place the strand of hair so that the ends of the hair protrude slightly beyond the clip. Close the clip.
  4. Wrap the strand of hair around the curling iron rod, starting at the ends of the hair and moving closer to the head.
    AUTO: Avoid touching the scalp with the curling iron can cause burns. 4. For a heavy curl effect, keep the strand of hair wrapped around the curling iron rod for +/-30 seconds or for a shorter time for light curls or
    curly hair.
  5. After use, turn off the iron with the on/off switch (6) by pressing it for 3 seconds, then disconnect it from the power source.

TECHNICAL DATA

  • Power source: 220-240 V ~50/60Hz
  • Nominal power: 44W, maximum power: 60W.
  • Automatic shutdown after 60 min.

CLEANING AND MAINTENANCE

  1. Before cleaning, disconnect the device from the power source and wait until it is cool to the touch.
  2. Clean the body of the device with a damp cloth. Never immerse the device in water or other liquids.
  3. Do not wind the power cord around the appliance.

Disposal

To protect your environment: please separate cardboard boxes and plastic bags and dispose of them in the corresponding bins. Used equipment must be delivered to the dedicated collection points due to hazardous components that can affect the environment. Do not dispose of this device in the general waste bin.

For More Manuals by ADLER, Visit LatestManuals

Leave a Reply