Abestorm S1 CFM Air Scrubbers User Manual

Abestorm S1 CFM Air Scrubbers

Abestorm-S1-CFM-Air-Scrubbers-PRODUCT

Abestorm Crawl Space NeatyFresh Max allows for the free circulation of air on the porch and under the house. High moisture levels in the crawl spaces can lead to the decay and rot of wooden pillars that support the house, floor, joists, and beam pillars. Also, high humidity causes an increase in termite activity and the growth of fungi. Rust, which causes corrosion and leaks in metallic pipes, is also factored into the moisture level in your crawl space.

With our ventilation fan, radon gas from treated wood is expelled away. This gas and other odors can easily spread into the living room and cause discomfort. The NeatyFresh Max fan uses a humidity switch to control the fan to commence operation. The fan starts operating when the recorded humidity surpasses the selected value.

WARNING!

Please note that the Filteair HEPAS1/S2/S3 should only be used with parts approved by Abestorm. The use of unauthorized parts or alterations to the machine could void your warranty. Contact an approved distributor for further assistance.

To Avoid the Risk of Fire or Electric Shock:

The unit must be electrically grounded.
Insert a 3-prong plug directly into an outlet with the Ground Fault Circuit Interrupting the device.
Do not use an adapter with this unit.
Do not use the unit in standing water.
If electrical parts get wet, they must be dried before use.

INTRODUCTION

The Filter HEPAS1/S2/S3 is a convenient filtration system that cleans the air. The Filter HEPAS1- /S2/S3 uses an effective blend of airflow and advanced filtration to expel airborne particles like mold spores, and dust. pollen, and pet dander. The Filter HEPAS1/S2/S3 is ideal for restoration jobs, including water, sewage, and fire.

IDENTIFICATION

Congratulations on purchasing a Filteair HEPAS1/S2/S3 air scrubber. To take advantage of the warranty plan, be sure to note the serial number and date of purchase. Model Number: DFilteair HEPAS1 D Filteair HEPAS2 D Filteair HEPAS3

Serial Number: ——- Date of Purchase:

HOW IT WORKS

When set to maximum airflow, the scrubber draws air through two types of filters- a Pre-Filter and a HEPA/Activated Carbon Filter.

Pre-Filter The first phase of filtration. the prefilter captures initial dust and allergen particles.
HEPA/Activated Carbon Filter The second phase of filtration, the HEPA/Activated Carbon Filter, catches smaller particles, down to 0.3 microns. Contributes to the control and prevention of the growth of bacteria, germs, and mold. Captures 99.99% of dust and allergens.
Filteair HEPA S1 and Filteair HEPA S2 with built-in UV-C light technology work with filters to enhance the elimination of airborne germs Titanium Dioxide is activated by the UV-C light to decompose remaining odor molecules caused by smoking, cooking, and pets.

Note: The unit will turn on the UV-C light every 4 hours for 3 minutes each time to sterilize the inside of the equipment and the filter.

SPECIAL FEATURES

Daisy-Chain Capability Using the auxiliary outlet on the control panel, you can link up to 3 units together. You can also daisy-chain the machines when they are stacked vertically (limit of 2 units).
Multi-Positional The Filterair HEPAS1/S2/S3 can be operated in the vertical position, as well as when stacked vertically (up to 2 units). When storing, the machines can be stacked horizontally to save space.

Removable Intake Panel

The Filter HEPAS1/S2/S3 is equipped with a removable panel on the intake side of the machine. The removable panel is quite useful in remediation applications, so you can draw air out of the room and create more negative pressure (use a manometer to monitor air pressure). To use panel:

Remove the panel.
Install the machine outside the containment area to draw air out.
Cut a hole in the containment plastic that is the size of the unit’s inlet.
Insert the inlet into plastic and seal the circumference tightly with duct tape.

KEY FEATURES

Filteair HEPAS1,Filteair HEPAS2 Abestorm-S1-CFM-Air-Scrubbers-fig-1

INSTRUCTIONS

SETUP

Place the Filteair HEPAS1/S2/S3 so that it is in the upright, vertical position.
Plug the machine into a standard 115-volt outlet. Note: Each unit needs 3 amps to operate.
The Filter HEPAS1/S2/S3 can be operated in the vertical or horizontal position, depending on the exact situation. At this point, adjust the machine to the optimal position.

THE CONTROL PANEL

Variable Speed Control The Variable Speed Control is used to adjust the power of the machine. Turn the knob in a clockwise direction, to increase the speed from maximum to minimum. The minimum speed setting is located immediately under the OFF button.
Auxiliary Outlet If more air filtration is necessary for a space, you can”daisy chain” or link up to 3 filter HEPAS1/S2/S3 to the same outlet. There is a maximum amperage of 12 when the units are turned off, and a maximum of 9 amps when the units are turned on. Other equipment can be plugged into the same outlet as the Filteair HEPAS1/S2/S3 as long as it doesn’t go above the maximum amperage.
Circuit Breaker Switch The Circuit Breaker Switch protects the unit if there are more than 12 amps of electricity passing the circuit. If this occurs, the switch will cut off the power to the unit.
The timer is Used to time the running time of the device. Start timing when the device is running, and pause timing when the device is stopped.

CHANGING THE FILTERS

Loosen the 4 locks that hold the filter board in place.
Slide out the filter panel board.
Remove the used filters and replace them with new filters.

WARNING

Always wear approved protective gear when changing the filters.
Filters should be changed after each remediation job.
If the indicator light is on, always change the HEPA/Activated Carbon Filter.

APPLICATIONS

Water Damage In this application, the Filteair HEPAS1/S2/S3 should be placed in the center of the affected area. The air scrubber will draw in the air, filter it, then blow out the newly cleaned air. To begin the process, simply turn on the scrubber and it will start cleaning the air. Keep in mind that if you are working in a large area or one divided by walls, you may need several air scrubbers to effectively clean the air.
Odor Control The Filteair HEPAS1/S2/S3, when used with the HEPA/Activated Carbon Filter, is excellent at odor control, as well. Simply place the carbon filter in the pre-filter slot and it will capture a wide variety of odor-causing gas molecules, such as volatile organic compounds (VO C’s), smoke, soot, and paint fumes.
Other Uses The Filteair HEPAS1/S2/S3 is also useful in many other applications including mold remediation, fire damage, dust control, and sewage remediation.

WARNING! Breathing Hazard

When using the Filteair HEPAS1/S2/S3 in a containment area, always turn off power to open combustion appliances, such as fireplaces, furnaces, water heaters, and HVAC systems, to avoid the risk of back-drafting carbon monoxide fumes.
If the Filter Change Light illuminates during the remediation process, immediately change the HEPNActivated Carbon Filter.

Tipping Hazard

Use caution when stacking units.
Do not stack more than 2 units on top of each other.
Falling equipment could cause bodily harm.

SAFETY NOTES

Always unplug the unit before performing any maintenance.
Check the power cord for damage (fraying, cuts, etc.) before use.
Verify that the GFCI outlet is working by powering on the machine and pressing the red GFCI test button. If the outlet is working, the”reset” button will pop up. To operate, press the reset button again.
To avoid electric shock, never use a water hose or pressure washer to clean the electrical components.
Check the pre-filter before operating the machine to ensure it is not clogged. If there is any sign of air flow restriction change the filter.
Make sure the unit is dry before installing clean filters.
When using the Filteair HEPAS1/S2/S3 for remediation purposes, replace both filters at the same time and always clean the machine in between jobs. This will help prevent cross-contamination.

LIMITED WARRANTY

This limited warranty starts from the date of purchase. Abestorm Solutions Inc. warrants to the original purchaser that this Abestorm product is free from manufacturing defects in material or workmanship for the limited warranty period of Six (6) months for parts and labor. This includes the shipment charges for replacement parts or units. One (1) year parts and labor.

The shipment fee to send the unit back to the manufacturer is not covered. Ten (10) years. Polyethylene body ONLY.

This limited warranty is valid only on products purchased from the manufacturer or Abestorm authorized dealer and operated, installed, and maintained according to the instructions in this user guide or furnished with the product.

Abestorm Solutions Inc. will not provide in-home service during or after the warranty period. You may be responsible for the shipping charge to bring the product to the manufacturer for service.

To receive warranty service, the purchaser must contact Abestorm at (888)276-9833 or sales@abestorm.com. Proof of purchase or order number is required to receive warranty service. During the applicable warranty period, a product will be repaired or replaced at the sole option of Abestorm.

LIMITED WARRANTY EXCLUSIONS

This limited warranty covers manufacturing defects in materials or workmanship encountered in a normal household, commercial or noncommercial use of this product and shall not cover the following:

Damage occurs in uses for which this product was not intended.
Damage caused by unauthorized modification or alteration of the product.
Cosmetic damage including scratches, dents, chips, and other damage to the product’s finishes.
Damage caused by abuse, misuse, pest infestation, accident, fire, floods, or other acts of nature.
Incorrect electrical line current, voltage, fluctuations, and surges cause damage.
Damage caused by failure to perform proper maintenance of the product.
Damage caused by not using the required filters for operation. (Pre-filter, HEPA&Activated Carbon Filter)
Damage caused by using in a high humidity environment (75% or higher).
Damage caused by using next to combustible materials/equipment that may or may not produce carbon monoxide.

IMPORTANT NOTICE: Keep the item’s packaging in case warranty service is required. Wiring Diagram Abestorm-S1-CFM-Air-Scrubbers-fig-6

Abestorm Solutions INC.
Add: 8605 SANTA MONICA BLVD#79525 WEST HOLLYWOOD, California,90069 USA
E-mail: sales@abestorm.com
website: www.abestorm.com
Tel: (888)276-9833

FAQs About Abestorm S1 CFM Air Scrubbers

What is the ideal lifespan of an air scrubber?

The lifespan of an Aerus air scrubber varies from 10 to 20 years based on the model and usage frequency. Because Aerus air scrubbers are long-lasting, years of clean air can be achieved from them with careful maintenance.

What is the required CFM for an air scrubber?

Therefore, to achieve the proper air filtering in a space measuring 25′ x 32′ x 12′ and requiring six air changes per hour, you will need at least one 1,200 CFM or two 500 CFM air scrubbers. The math operates as follows: 25, 32, and 12 feet equal 9,600 cubic feet. 9,600 cubic feet are equal to one air change.

Do dust mites get rid of dust?

An air scrubber is an item that you can install straight into your HVAC system’s ductwork. It eliminates dust, odors, pet dander, surface pollutants, air pollution, and volatile organic compounds.

Do air scrubbers require upkeep?

A well-maintained air scrubber system is essential to its proper operation. Every week or every month, clean the sections of the air scrubber. Six suggestions are provided below to assist you in completing each maintenance round.

Are air scrubbers energy-hungry devices?

To put it in a language that most people can comprehend, the energy consumption of an air purifier is comparable to that of a cell phone charger. This implies that you could run one continuously for roughly $120 a year.

Do air purifiers eliminate pollen?

Depending on its capacity, air scrubbers can eliminate a variety of airborne contaminants, including smoke, bacteria, viruses, fungi, dust, pet dander, pollen, and chemicals.

Can you hear air scrubbers?

The HEPA 700 Air Scrubber only produces 67 dB at its peak, which is hardly louder than a typical conversation. Because of this, using this air scrubber in crowded, bustling spaces like businesses and schools is highly recommended.

Do smoke-removing air scrubbers work?

When it comes to removing smoke from indoor smokers or a house that has just experienced a fire, air scrubbers work incredibly well. Toxic gases can be removed from industrial spaces like factories using air scrubbers.

Are dehumidifiers made of air?

In a nutshell. Dust, pet dander, pollen, and smoke are among the airborne allergens that are eliminated by air scrubbers and purifiers. Some even eradicate microorganisms and eliminate smells. However, they don’t lessen the interior humidity that could have first caused such pollutants.

Where should I put an air scrubber?

Within the supply plenum are air scrubbers fitted. The HVAC air handler’s sheet metal box, which is huge and situated either on top of it or next to it, is where the hot and cold air exits to feed into the remaining supply ducts. The side of the plenum must first have a square hole cut out of it before the unit can be placed.

For More Manuals by Abestorm, Visit LatestManuals

Abestorm S1 CFM Air Scrubbers User Manual 10

Abestorm S1 CFM Air Scrubbers User Manual [pdf]