Honeywell LRDWMK Wall Mounting Kit
Introduction – Honeywell
The LRDWMK is a wall mounting kit compatible with the following sensors:
- MLS3500DRF
- MR3500DRF
- MR3500RF
Installation Instructions
- Choose Required Orientation and Location.
- Remove Cover.
- Remove the Sensor Mounting Assembly.
- Drill Cable Entry Hole (as required)
- Secure Base to Wall or Ceiling.
- Prepare the Sensor.
Remove both retaining springs.
IMPORTANT: Dispose of springs, cable clamps, and terminal cover by local waste disposal regulations. - Insert Sensor into Mounting Bracket.
- Attach Retaining Clips to the Sensor.
- Rotate Sensor and Sensor Mounting Assembly.
- Secure Sensor Mounting Assembly to Base.
- Connect Cables to Sensor.
Refer to the appropriate sensor installation instructions for connection details. Do not fit cable clamps or terminal covers. - Adjust Sensor Detection Angle.
- Commission the Sensor
Refer to the appropriate sensor installation instructions for commissioning details. - Refit Cover and Secure
© 2022 Honeywell International Inc. Ex-Or reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any person of such revisions or changes. Honeywell, St Marks Court, North Street Horsham, West Sussex RH12
1BW Tel: +44 (0)1942 719229 Web: www.ex-or.com
EU contact for regulatory questions: PEHA Elektro GmbH & Co. KG
Gartenstraße 49, 58511 Lüdenscheid Germany Web: www.peha.de
At the end of their useful life the packaging, and product should be disposed of by a suitable recycling centre. Do not dispose of normal household waste. Do not burn.
For More Manuals by Honeywell, Visit Latest Manuals