Honeywell LSHDWMK Wall Mounting Kit
Installation Instructions – Honeywell
Important
Only suitably qualified personnel should install this equipment.
Introduction
The LSHDWMK is a wall mounting kit compatible with MLS3500RF, MR3500DRF, and MR3500RF detectors.
Contents
- Remove Springs & Attach Shell
- Remove and discard the 2 springs
- Fit surface mount fittings
- Fit Surface mount shell
- Mount Bracket
- On Wall
- Conduit Box
Note: Mount vertically in racking aisle applications.
- Route Cables
Refer to detector instructions
- Fix to Bracket
Offer the detector up to the bracket, clip the adaptor ring to the detector, and fix it with the 2 small screws (supplied).
- Connect Cables
Refer to the appropriate detector installation instructions for connection details.
- Fix WMK Lid in Place
- Adjust the Direction of View
- Commission Detector
Refer to the appropriate detector installation instructions for commissioning details.
© 2022 Honeywell International Inc. Ex-Or reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any person of such revisions or changes.
Honeywell, St Marks Court, North Street Horsham, West Sussex RH12 1BW Tel: +44 (0)1942 719229 Web: www.ex-or.com
EU contact for regulatory questions: PEHA Elektro GmbH & Co. KG Gartenstraße 49, 58511 Lüdenscheid Germany Web: www.peha.de
At the end of their useful life the packaging, and product should be disposed of by a suitable recycling centre. Do not dispose of normal household waste. Do not burn. LSHDWMK Wall Mounting Kit Installation Instructions 3010-0745-001 REV B, 27-Sept-2022.
For More Manuals by Honeywell, Visit Latest Manuals
